Questions

Windows keeps re-starting, cannot boot from xp cd

+
0 Votes
Locked

Windows keeps re-starting, cannot boot from xp cd

luvly_krissy
Hello,

When I start my computer, it reaches upto the windows xp image with the blue bar below below it, but then it immediately restarts the computer.

I tried booting the computer with windows xp cd. During the boot time the computer reads from the cd but some how bypasses the bios settings and starts booting from the harddisk again. And then the computer again restarts.

I have tried different startup cds. Nothing works.

I believe its got something to do with a virus or something. Pls help urgently.

Thanks a lot.
Kris.
+
0 Votes
OH Smeg

This involved pressing the F6 key when the BIOS Screen appears and holding the Key down till you get a White on Black screen with different Boot Options.

Then using the Arrow Keys highlight Safe Mode and press Enter. This will start the system with a minimal set of Drivers and allow you to do what is required to fix your System.

if you are working off a M$ Branded Install CD you can also attempt a repair Install but I would recommend having a full working Backup in place before trying to do this. Full directions are located here on the M$ Web Site

http://support.microsoft.com/kb/978788

You need to follow the directions listed under Method 2 here

Method 2: Repair install of Windows XP by starting your computer from the Windows XP CD
Note If Windows XP was preinstalled on your computer, you may need the installation CD to reinstall. Contact your computer manufacturer to make sure that you have the installation CD for a repair installation.

To reinstall Windows XP by starting your computer from the Windows XP CD, follow these steps:
Insert the Windows XP CD into your computer's CD drive or DVD drive, and then restart your computer.
When you receive the "Press any key to boot from CD" message on the screen, press a key to start your computer from the Windows XP CD.
The following message on the Welcome to Setup screen will appear:
This portion of the Setup program prepares Microsoft Windows XP to run on your computer: To setup Windows XP now, press ENTER. To repair a Windows XP installation by using Recovery Console, press R. To quit Setup without installing Windows XP, press F3.
Press ENTER to set up Windows XP.
On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
Follow the instructions that appear on the screen to reinstall Windows XP. After you repair Windows XP, you may have to reactivate your copy of Windows XP. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
310064 (http://support.microsoft.com/kb/310064/ ) How to troubleshoot Windows XP Setup problems when you upgrade from Windows 98 or Windows Millennium Edition
If you successfully completed the reinstallation, congratulations. You are almost done. Please continue to the "After you reinstall Windows XP" section to finish.

If you received an error or if the reinstallation did not finish, unfortunately, this article did not resolve your problem. For your next steps, you may want to ask someone whom you know for help. Or, you may want to contact Microsoft Support to help you resolve this problem.
Back to the top
After you reinstall Windows XP
After you finish the reinstallation, complete the following final tasks.

Note You may also want to enable the firewall in Internet Explorer. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
283673 (http://support.microsoft.com/kb/283673/ ) How to turn on or turn off the firewall in Windows XP
Reinstall Windows XP Service Pack 2
If Windows XP Service Pack 2 (SP2) was installed on your computer before you reinstalled Windows XP, you must reinstall SP2. If you did not already reinstall SP2 with the Windows XP in the previous section, use one of the following methods to reinstall SP2 now.
Method 1: Obtain the service pack CD and reinstall the service pack after you reinstall Windows XP
To order Windows Service Pack 2 on CD, visit the following Microsoft Web site:
http://www.microsoft.com/windowsxp/downloads/updates/sp2/cdorder/en_us/default.mspx (http://www.microsoft.com/windowsxp/downloads/updates/sp2/cdorder/en_us/default.mspx)
Method 2: Download the service pack after you reinstall Windows XP
For more information, click the following article number to view the article in the Microsoft Knowledge Base:
322389 (http://support.microsoft.com/kb/322389/ ) How to obtain the latest Windows XP service pack
Reinstall all updates to Windows
After you reinstall Windows XP, you must reinstall all updates to Windows also. To reinstall Windows updates, visit the following Microsoft Web site:
http://windowsupdate.microsoft.com (http://windowsupdate.microsoft.com)
Reinstall Internet Explorer 7
When Windows XP is repaired and is running correctly, reinstall Internet Explorer 7. To do this, you will need the Internet Explorer 7 installation package. This package is available through Windows Update. Also, the package may still be on the computer from the first time that you installed Internet Explorer 7. Locate the installation package in the folder in which you saved the files, and reinstall the program.

Note This package may be located in the Temporary Internet Files folder. If you cannot locate the Internet Explorer 7 installation package, visit the following Microsoft Web site to obtain this package:
http://www.microsoft.com/windows/ie/downloads/default.mspx (http://www.microsoft.com/windows/ie/downloads/default.mspx)
To connect to the Microsoft download site, you must have a functional Web browser. If Internet Explorer 6 does not work on the computer after you uninstall Internet Explorer 7, you cannot download the Internet Explorer 7 installation package. In this situation, you can use a computer that has a functional Web browser to download the Internet Explorer 7 installation package. Then, use a shared network drive to install the program onto the repaired computer. If you cannot use a shared network for this purpose, copy the Internet Explorer 7 installation package onto a CD, and install Internet Explorer 7 on the repaired computer from the CD.

If you had difficulty completing these final steps, unfortunately, this content is unable to help you any further. So, you might want to ask someone for help, or you might want to contact Support.


To get the system to boot off the Windows Install CD you need to enter the BIOS and set the Boot Order to Floppy first if you have one then Optical Drive and finally HDD. Remember to save the changes as you exit the BIOS of the changes will not be made.

Col