Searched for: "ver ios"

About 35 results for "ver ios"

  • TechRepublic Staff // May 23, 2013, 9:43 PM PST

    4500 remarking dscp value 1 to 0

    Hi, I am getting a very strange problem where 4500 switch is remarking the packet with dscp 1 to 0. Let me explaint the setup. I have two PCs connected on same switch but on diff...

  • rockingoa // May 23, 2013, 9:43 PM PST

    4500 remarking dscp value 1 to 0

    Hi, I am getting a very strange problem where 4500 switch is remarking the packet with dscp 1 to 0. Let me explaint the setup. I have two PCs connected on same switch but on diff...

  • HAL 9000 // May 22, 2013, 3:34 PM PST

    4500 remarking dscp value 1 to 0

    Hi, I am getting a very strange problem where 4500 switch is remarking the packet with dscp 1 to 0. Let me explaint the setup. I have two PCs connected on same switch but on d...

  • mickeous // April 5, 2011, 8:07 PM PST

    How to perform Memory Upgrade - ASA5510

    Hello all, I have ASA5510 running IOS ver 7.2. I want to upgrade to 8.3 IOS but the current memory is 256 DDR. My question is can I upgrade it to 1gb DDR using the normal desktop ...

  • mickeous // April 3, 2011, 10:11 PM PST

    ISP SET UP

    Thanks go out Chas for help. Initially, I requested for /24 to be on the safe side. Currently, I have the ff devices to setup in my Datacenter. 1 ASA 5510 running IOS ver 7.2 - fo...

  • TechRepublic Staff // April 3, 2011, 7:57 PM PST

    Reponse To Answer

    Thanks go out Chas for help. Initially, I requested for /24 to be on the safe side. Currently, I have the ff devices to setup in my Datacenter. 1 ASA 5510 running IOS ver 7.2 - f...

  • NetMan1958 // January 20, 2011, 2:59 AM PST

    WhY is BOOTLDR in SHOW VER pointing to a different IOS on cisco 2960G-24TC

    Just changed the IOS on a cisco 2960, but when command "show ver" is used the old IOS shows next to BOOTLDR, why?

  • CG IT // August 3, 2010, 6:27 AM PST

    Cisco Router Access List configuration problem - Help please

    Hello everyone, I wonder if anyone can help, I am having real trouble disabling imcp ping echo requests and other icmp services using access lists. I will post my config but I hav...

  • TechRepublic Staff // May 31, 2010, 2:17 PM PST

    depends

    sh ver only shows the bootstrap, bootloader, and IOS version running. Sh log might show logs but that wastes time. sh controllers it a good one but also sh int [interface] which wo...

  • TechRepublic Staff // December 2, 2009, 10:49 PM PST

    Enhanced Image

    To check which image a switch is running: ****************************************** SW2950#sh ver Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L...