Setting Up the APC Smart UPS VT for Use With the AARTS System

This papers a procedure to setup and configure the APC Smart VT UPS with the Accel-RF Corporation Automated Accelerated Reliability Test Station (AARTS). Note that the exact model of the UPS should be sized appropriately for the expected maximum load of the system. A maximum load map for each phase of the 208V 3-phase circuits should have been supplied with the model delivered by Accel-RF. The connections required for this setup. The Power Chute monitoring and shutdown control interface is designed to ONLY work through an Ethernet communication interface. Since the UPS for the AARTS system is dedicated, it is undesirable to presume a corporate LAN is active and available for routing communications between the two systems during a facility power failure event.