you’ve ever worked with Hyper-V, you may know that a virtual machine is made up
of a few files and some configuration on the host. Those files encapsulate the
operation system installed on the virtual machine, as well as the applications
installed on that operating system.

how do those files look on the host? Let’s break down the anatomy of a Hyper-V
VM. The first area to look at on a Hyper-V server is the settings screen for
the host. This can be done either locally (in the case of Windows Server
2008/2012, as a full install with the Hyper-V role) or remotely with Hyper-V
Manager. Figure A below shows the Hyper-V Settings for a ThinkServer RD630 host running Windows Server 2012 with Hyper-V:

Figure A

key settings in this path are the Virtual Hard Disks path (Default location is C:\Users\Public\Documents\Hyper-V\Virtual
Hard Disks
) and the Virtual Machines path (Default location is C:\ProgramData\Microsoft\Windows\Hyper-V),
which are the first two options in the settings screen. These options are
global options, meaning each host will have new virtual machines created to
this setting. It’s also important to note that when you create a virtual
machine, you have the option to specify where the virtual disks go (the first
option in the figure above) but not where the virtual machine settings go.

pretty clear what goes in the Virtual hard Disks folder: VHD and VHDX virtual
disk files. The VHDX disk format was introduced in Windows Server 2012 and
supports disk geometry up to 64 TB for a virtual machine. The VHD format,
supported with all versions of Hyper-V goes up to 2 TB.

second path in the Hyper-V settings is a very complicated path, having additional
configuration elements for the virtual machines. This default path on the
ThinkServer RD630 is shown in Figure B below:

Figure B

important to note that this path contains .XML files, ID folders for each
virtual machine, and inside of there .BIN and .VSV files for the virtual

  • The .XML file
    contains the configuration of the virtual machine.
  • The .BIN file has
    the memory of a VM from a snapshot (and the disk differences, if present, would
    be a .AVHD file).
  • The .VSV file is
    the saved state of the virtual machine.

files in these various locations compose the virtual machine in regards to its
position on the host. If you need to move a virtual machine, it’s important to
not just pick up .VHD/.VHDX files and copy, paste or move them, but to move
them in a manner that takes care of all of these components. This can be done
via the Hyper-V Manager interface with the migration tool or by leveraging a
backup tool, replication engine, or System Center Virtual Machine Manager.

you deploy a Hyper-V host, it’s a good idea to change the default settings. The
host I have in this example is only connected to local storage, but if there is
a shared storage resource or cluster configuration; the C:\ drive isn’t the
right place.

you had to manipulate Hyper-V files? What tips have you learned along the way?
Share your comments below.