Acer Travelmate 4060 New Hard Drvie

By chris.lambert ·
Hi All,

Here's an odd one for you.

I'm installing a new Hard Drive into a Acer TravelMate 4060.

I have it set to boot from the CD, but when the Laptop is turned on it just reports that there is no Operating System. If I put the old HDD in then it see's the OS and then will happly boot from the CD.

Had anyone come across this problem before and what was the fix for it. I don't want to have to keep going back to the old HDD as it in on it's last legs and I need to be able to pull data back from it later.

I've spoken to Acer, but as it is not them doing the work and I have replaced the HDD they are not interested in helping.



This conversation is currently closed to new comments.

17 total posts (Page 1 of 2)   01 | 02   Next
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Boot sequence...

by OldER Mycroft In reply to Acer Travelmate 4060 New ...

You say it sees the os then boots from the CD.

Have you changed the bios settings to boot from the CD first?

Collapse -

Boot sequence...

by chris.lambert In reply to Boot sequence...

The current Boot sequence is


But for some reason it looks like it checks the HDD first no matter what the order is.

Collapse -

Strange Acer don't want to help...

by OldER Mycroft In reply to Acer Travelmate 4060 New ...

I've dealt with them in the past, mind you that was under warranty.

Maybe it's because they're stuck in a time-warp way down there at the bottom end of the UK!

Thing is, they told me I could remove my HDD before returning my Acer for repair under warranty, because they consider all Acer NBs as business machines and HD removal doesn't invalidate the warranty.

So, warranty or not, changing your HDD they should still be on talking terms from a support point of view.

Are you sure the BIOS is accepting your changes. ie Checking it again after power-down / power-up.

Collapse -

Strange Acer don't want to help...

by chris.lambert In reply to Strange Acer don't want t ...

Yep, double checked the bios settings.

However i have noticed something in the last 30 mins.

It looks to be an issue with the HDD and the laptop. I can put the HDD into another laptop and it will run fine. However when I put it into the Acer it won't see the HDD, but if I try a different HDD then it will see it.

The new HDD is a Samsung HM060HC if that helps any.

Collapse -

You've got me struggling now...

by OldER Mycroft In reply to Strange Acer don't want t ...

But if the other laptop can recognise it, have you tried to format it on the other laptop and then returned it to the Acer?

Would that help the Acer "see" it?

What about the pinouts on the back?
How are they set at present?

Collapse -

Me to

by chris.lambert In reply to You've got me struggling ...

I've installed Win XP Home & Pro onto the drive via another laptop but still the Acer won't see the drive. I have tryed the Pins as both Master and Cable select.

Both have the same out come.

I'm wondering if it's a BIOS issue. But even this seems a little unlikely as it see's other HDD's ok.

It's just seems to be the Acer and Samsung combination that won't work.

Collapse -

Acer - Samsung compatibility?...

by OldER Mycroft In reply to Me to

How about the difficulties I've had for the last two years regarding my Acer and its TSST DVD-RW. It stopped recognising any media (blank that is) and only reads Magazine cover discs which have obviously been PRESSED rather than burned.

TSST = Toshiba Samsung Storage Technologies.

It's not just the HDDs that cause Acer problems.

Collapse -

the solution

by kawash In reply to Acer - Samsung compatibil ...

Acer america are idiots. that is why you are having
problems. The newer bios which they make impossible to
update will recognize your samsung drive. Trust me I had
the same exact problem. The acer Euro support site gives
you the dos flash utility and readme files as well.

Here is the solution my friend.
1. download Driver Free Disk For BIOS Flashing from
2. download the new bios from
3. create the bootdisk by running the executable from then copy phlash16.exe as well as the wph
bios file to the boot disk.
I am assuming you can get your hand on an external usb
floppy drive. boot from floppy and flash your bios. and
your laptop will recognize the drive.

Collapse -

This does work - almost

by tipam In reply to the solution

I flashed the BIOS using WinPhlash in XP under the old HDD. When the BIOS updated it saw the new Samsung Hard-drive! I then installed the setup files for a WinXP installation, but when it rebooted, the drive would not boot as if the BIOS can't detect the boot sector. Unfortunately, I can't find another BIOS update to fix this BIOS update!

Collapse -

Just checked online...

by OldER Mycroft In reply to You've got me struggling ...

Were you aware that there is a thing called "Acer Guaranteed Compatible HDDs" - I wasn't.

It rather suggests that some HDDs may be more (or less!) compatible than others.

(Edited for benefit of last line.)

Back to Hardware Forum
17 total posts (Page 1 of 2)   01 | 02   Next

Related Discussions

Related Forums