Cisco 7902 and 7912 phone calls breaking up

By smitchell ·
I am expieriencing calls breaking up on two models of Cisco phones, the 7902 and the 7912. I have 7940's and 7960's that work fine on the same 3560 POE router. They are all being ran by Cisco CallManager ver. 4.1 and each model phone has the latest software versions. Has anyone expierenced this problem?

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Standard VOIP issues?

by Timbrewolf In reply to Cisco 7902 and 7912 phone ...

If you don't already, you may want to turn Diffserv on since Cisco will automatically handle the voice packets QoS.

The other best practice is to VLAN your phones away from the network and setup QoS manually.

Breaking up, static, and performance issues are usually related to traffic management. I'm not familiar with those phones, but it could be the later models have some better packet management built in.

Collapse -

Check those RJ connectors

by mjd420nova In reply to Cisco 7902 and 7912 phone ...

Too many problems with breaking up and static can be caused by loose or improperly terminated RJ connectors, on both ends, not just the phone but any wall jacks and rack connections.

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums