General discussion

Locked

How to connect two NT server 4 through 9

By cagandhi ·
I have two Office nearly about 2Km appart from eachother. On both office i have installed NT server 4.0, with RRAS on both site, DHCP also installed on both site.
I want to connect both server hrough 9.6 kbps hotline. HOW?
Which Instruments needed?
I can able to connect both nt server through normal Dial up line with modems.

This conversation is currently closed to new comments.

14 total posts (Page 2 of 2)   Prev   01 | 02
Thread display: Collapse - | Expand +

All Comments

Collapse -

How to connect two NT server 4 through 9

by cagandhi In reply to How to connect two NT ser ...

It says Authentication timeout?????

Collapse -

How to connect two NT server 4 through 9

by salexiev In reply to How to connect two NT ser ...

Hello, lets divide the bottleneck on two parts:
1.Modems ? please check if you are using the correct driver, especially for the leased line modems. If you are using leased line, please check the line connection (leased line connection) ? if the modems are able to establish connection go ahead.
2.Network ? the server side has to be set to allow incoming connections with TCP/IP and give the client access to the whole network. It is preferable not to use DHCP, bit static IP. There must be user, which has dial-in permission. At client side ? you have to configure one dial-up networking session with the same user name and password, authentication (for the beginning) ? clear text, the same static IP, and especially remote WINS and DNS and logging to network option checked . After completing this, you would try to establish network session ? it must work. 9600 is not a great speed, but it works.

Collapse -

How to connect two NT server 4 through 9

by cagandhi In reply to How to connect two NT ser ...

The mistake i m doing is "in ras it is not needed to give DOMAIN name, i mean leave it blank & instantly it got connected!!!!"

Thanks for your support...

Collapse -

How to connect two NT server 4 through 9

by cagandhi In reply to How to connect two NT ser ...

This question was closed by the author

Back to Windows Forum
14 total posts (Page 2 of 2)   Prev   01 | 02

Related Discussions

Related Forums