General discussion


RAS with NT Server

By jwebber ·
I have NT Server sp4 with RAS enabled and set up. I also have 2 COM ports with USRobotics modems on each port. On the telco side I set up 1 number to "role" to each extension of the modem. With Modem1 off and the other will pick up. With Modem2 off the other will pick up. So that rules out COM Ports and Modems. But when i turn both modems on, the first will pick up and connect but when I try to dial in with another pc it will not connect.

Does anyone have any insite as to what setting or procedure I have missed?

I am also trying to set this up on my BDC with no luck at all. It will answer, but i cannpt ping anything but the IP that is given to the client when i dial in. To validate the lmhosts file on the client, Do you have to RAS in through the PDC?

This conversation is currently closed to new comments.

11 total posts (Page 2 of 2)   Prev   01 | 02
Thread display: Collapse - | Expand +

All Comments

Back to Windows Forum
11 total posts (Page 2 of 2)   Prev   01 | 02

Related Discussions

Related Forums