T1 Line

By porknar ·
We have just move to a t1 line that includes our phone and data. I am try to configure my server to work and I am not quiet sure how to achieve this. I have a 2 Nic cards, and I have been told this is the way to confgre the service. I also have a linksys router, which I am not sure I need anymore. I also have an unmanaged 24 port switch. Any help with the configuration is greatly appericated.

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -


by avradutta In reply to T1 Line

The T1 line from your ISP should terminate at the mux and a serial line from the mux to the modem will connect your routers serial interface with a V.35 or smart serial port.
The switch should connect to the router and there should be two uplinks from the switch to the the servers via the NIC cards.
This is a very general setup.
Your question ais a little vague because how is the voice connected, and how are you using it? Is the T1 connected to a pBX and you want to use your data through that? Or have u terminated the T1 at a router?
Please give some explanation onf the setup a little more.

Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums