-
Lenovo Ideapad K1 teardown
The Lenovo IdeaPad K1 is the company's consumer-focused tablet. The 10.1" Android tablet has a dual-core processor, two cameras, and comes in 16GB, 32GB, and 64GB versions. Follow along as I crack open the IdeaPad K1 for a look at the hardware inside.
For an in-depth analysis of the Lenovo IdeaPad K1's internal hardware, check out my post, "Lenovo IdeaPad K1 teardown: Easy to open, not so easy to service".
Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler -
Cracking Open Lenovo IdeaPad K1: Storage and price
According to Lenovo's documentation, the IdeaPad K1 is available in 16GB, 32GB, and 64GB versions. But as of this writing, only the 32GB model ($499.99 US) is available for purchase on Lenevo's site. The current versions support Wi-Fi, but there's room in the case and on the motherboard for a 3G card.
Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler -
Cracking Open Lenovo IdeaPad K1: In the box
-
Cracking Open Lenovo IdeaPad K1: Power adapter and USB connector cable
A power adapter, USB connector cable, and product documentation are included with the IdeaPad K1.
-
Cracking Open Lenovo IdeaPad K1: Front
The Lenovo IdeaPad K1 weighs 1.65 lbs. and measures 10.4" (W) x 7.4" (H) x 0.5" (D). Unlike some Android tablets, the IdeaPad K1 has a physical Home button.
-
Cracking Open Lenovo IdeaPad K1: Back
The removalable back cover has a textured surface. This makes the IdeaPad K1 less likely to slip out of your hands than a device with a slick back.
-
Cracking Open Lenovo IdeaPad K1: Internal mic, power button, volument controls, screen rotation lock, and microSD card slot
Along the IdeaPad K1's left edge are the built-in microphone, power button, volume controls, screen rotation lock switch, and microSD card slot.
-
Cracking Open Lenovo IdeaPad K1: Mini HDMI port, 3.5mm audio jack, and connector port
Along the IdeaPad K1's bottom edge are the Mini HDMI port, 3.5mm audio jack, and connector port.
-
Cracking Open Lenovo IdeaPad K1: Popping loose the back cover
Using a thin metal blade, I popped loose the IdeaPad K1's plastic back cover.
-
Cracking Open Lenovo IdeaPad K1: Removing the back cover
-
Cracking Open Lenovo IdeaPad K1: Inside the case
With the back cover removed, we get our first look at the internal hardware the powers the Lenovo IdeaPad K1. As with most of the tablets I've disassembled, the battery occupies much of the space inside the K1's case.
-
Cracking Open Lenovo IdeaPad K1: Removing the battery screws
The replaceable battery is held in place with four Phillips screws.
-
Cracking Open Lenovo IdeaPad K1: Hidden battery screw
One of the battery screws is hidden under a pair of ribbon cables and a piece of tape.
-
Cracking Open Lenovo IdeaPad K1: Removing the battery
-
Cracking Open Lenovo IdeaPad K1: 3,700 mAh, 27Wh Li-Polymer battery (L10M2I21)
-
Cracking Open Lenovo IdeaPad K1: Removing the metal rim screws
Before removing any other internal components, I wanted to remove the metal rim that surround most of the IdeaPad K1's outer edge. The rim is held to the front panel assembly with several Phillips screws.
-
Cracking Open Lenovo IdeaPad K1: Prying loose the metal rim
With the screws removed, I used a plastic spudger to pop the rim loose from the front panel assembly. I was very careful not to damage the assembly, LCD, or any other components when doing this.
-
Cracking Open Lenovo IdeaPad K1: Removing the metal rim
A metal rim surrounds most of the IdeaPad K1's back edge. Once I removed the screws that held it in place, I was able to gently pry it loose from the front panel assembly.
-
Cracking Open Lenovo IdeaPad K1: Inside the case with the battery removed
-
Cracking Open Lenovo IdeaPad K1: Removing the button PCB screws
After removing the metal rim, I turned by attention to the many printed circuit boards (PCBs) inside the IdeaPad K1. This PCB contains the device's left-side controls and internal microphone.
-
Cracking Open Lenovo IdeaPad K1: Removing the button PCB
-
Cracking Open Lenovo IdeaPad K1: Button PCB
The internal microphone, power button, volume up/down buttons, and screen rotation lock switch are all located on this small circuit board.
-
Cracking Open Lenovo IdeaPad K1: Removing the microSD card reader
As with the IdeaPad K1's left-side controller circuit board, the microSD card reader is mounted to a separate PCB.
-
Cracking Open Lenovo IdeaPad K1: microSD card reader
-
Cracking Open Lenovo IdeaPad K1: Removing the speakers
The speakers are held in place by the rubber cushions that surround them.
-
Cracking Open Lenovo IdeaPad K1: Speakers
-
Cracking Open Lenovo IdeaPad K1: Removing the front-facing camera screws
The IdeaPad K's 2MP front-facing camera is held to the front-panel assembly with a single Phillips screw.
-
Cracking Open Lenovo IdeaPad K1: Removing the front-facing camera
-
Cracking Open Lenovo IdeaPad K1: 2MP front-facing camera
-
Cracking Open Lenovo IdeaPad K1: Disconnecting the motherboard cables
Before removing the IdeaPad K1's motherboard, I detached all the remaining ribbon cables and connectors.
-
Cracking Open Lenovo IdeaPad K1: Removing the motherboard screws
The IdeaPad K1's motherboard is held to the front-panel assembly with several Phillips screws.
-
Cracking Open Lenovo IdeaPad K1: Removing the motherboard
-
Cracking Open Lenovo IdeaPad K1: Motherboar and attached components - Bottom
-
Cracking Open Lenovo IdeaPad K1: Motherboard and attached components - Top
-
Cracking Open Lenovo IdeaPad K1: Front panel assembly with Home button
-
Cracking Open Lenovo IdeaPad K1: Removing the Home button screws
The IdeaPad K1's physical Home button is also a separate component.
-
Cracking Open Lenovo IdeaPad K1: Removing the Home button
-
Cracking Open Lenovo IdeaPad K1: Home button
-
Cracking Open Lenovo IdeaPad K1: Front panel assembly
After removing the motherboard and most other internal components, I stopped dissecting the front panel assembly. The IdeaPad K1's is held to the front panel (digitizer) with several screws and likely adhesive. There are also several pieces of thin metal foil that are glued to the back of the LCD and assembly. Removing the LCD from the assembly would likely require me to remove and damage these piece of foil.
-
Cracking Open Lenovo IdeaPad K1: AU Optronics B101EW05 LCD (1280 x 800)
-
Cracking Open Lenovo IdeaPad K1: Atmal touchscreen controllers
-
Cracking Open Lenovo IdeaPad K1: Wi-Fi antenna
-
Cracking Open Lenovo IdeaPad K1: Atmel mXT1386 touchscreen controller
-
Cracking Open Lenovo IdeaPad K1: Atmel mXT154 touch controllers x3
-
Cracking Open Lenovo IdeaPad K1: Removing the Mini HDMI port and 3.5mm audio jack PCB
The Mini HDMI port and 3.5mm audio jack are mounted on their own circuit board, which is held to the motherboar with Phillips screws.
-
Cracking Open Lenovo IdeaPad K1: Mini HDMI port and 3.5mm audio jack PCB
-
Cracking Open Lenovo IdeaPad K1: Removing the 5MP rear-facing camera
The IdeaPad K1's 5MP rear-facing camera is held to the motherboard by its connector and a piece of tape.
-
Cracking Open Lenovo IdeaPad K1: 5MP rear-facing camera
-
Cracking Open Lenovo IdeaPad K1: Motherboard - Top
-
Cracking Open Lenovo IdeaPad K1: Motherboard - bottom
-
Cracking Open Lenovo IdeaPad K1: 1.0 GHz dual-core NVidia Tegra 2 application processor (12B2B375 1109A4)
-
Cracking Open Lenovo IdeaPad K1: 1GB Eplida B8132B2PB-6D-F LPDDR2 DRAM
-
Cracking Open Lenovo IdeaPad K1: Pericom Pi3LVD400 3.3V, 4-Differential Channel High-speed 1:2 Switch
-
Cracking Open Lenovo IdeaPad K1: Texas Instruments LVDS83B power controller
-
Cracking Open Lenovo IdeaPad K1: 32GB Toshiba THGBM2G8D8FBA1B NAND Flash
-
Cracking Open Lenovo IdeaPad K1: Texas Instruments TPS65862 power-management IC
-
Cracking Open Lenovo IdeaPad K1: AzureWave AW-NH611 802.11 b/g/n WLAN, Bluetooth, FM Combo Module IC
-
Cracking Open Lenovo IdeaPad K1: Broadcom BCM4751 Integrated Monolithic GPS Receiver
-
Cracking Open Lenovo IdeaPad K1: Texas Instruments LC02A 12K G4 DHRP
-
Cracking Open Lenovo IdeaPad K1: SMSC USB3315 Hi-Speed USB Transceiver
-
Cracking Open Lenovo IdeaPad K1: National Semiconductor LM393 Lower Power Low Offset Voltage Dual Comparator
-
Cracking Open Lenovo IdeaPad K1: Invensense MPU-3050 Triple Axis Gyroscope with Embedded Digital Motion Processor
-
Cracking Open Lenovo IdeaPad K1: Winbond W25X20BVN1G 2Mbit Serial Flash Memory
-
Cracking Open Lenovo IdeaPad K1: ENE Technology KB930BF A1 (clock generator?)
-
Cracking Open Lenovo IdeaPad K1: Intersil ISL6251 Low Cost Multi-Chemistry Battery Charger Controller
-
Cracking Open Lenovo IdeaPad K1: NXP 74HC253D Dual 4-Input Multiplexer
-
Cracking Open Lenovo IdeaPad K1: Motherboard made by HannStar
-
Cracking Open Lenovo IdeaPad K1: Complete teardown
The Lenovo IdeaPad K1 wasn't difficult to disassemble, but would-be K1 service people should know the following:
- The battery can be replaced, but at least one of the screws is hidden under a pair of ribbon cables and a piece of tape.
- The outer metal bezel should be removed before removing the motherboard.
- Most of the internal components (card readers, ports/jacks, buttons, etc.) are mounted to separate PCBs. The PCBs are easy to remove, but held in place with lots of screws.
- Separating the digitizer (front panel) from the LCD display requires removing (and likely damaging) several pieces of thin metal foil.
Cracking Open Lenovo IdeaPad K1: ENE Technology KB930BF A1 (clock generator?)
Related Topics:
Hardware Innovation Mobility Networking Storage Data Centers Smart Persons GuidesBy Bill Detwiler
Bill Detwiler is Managing Editor of TechRepublic and Tech Pro Research and the host of Cracking Open, CNET and TechRepublic's popular online show. Prior to joining TechRepublic in 2000, Bill was an IT manager, database administrator, and desktop supp...
Disclosure
Bill Detwiler has nothing to disclose. He doesn't hold investments in the technology companies he covers.
Full Bio
Bill Detwiler is Managing Editor of TechRepublic and Tech Pro Research and the host of Cracking Open, CNET and TechRepublic's popular online show. Prior to joining TechRepublic in 2000, Bill was an IT manager, database administrator, and desktop support specialist in the social research and energy industries. He has bachelor's and master's degrees from the University of Louisville, where he has also lectured on computer crime and crime prevention.