Question Locked

0211: Keyboard error on Compaq Presario 2100 Laptop

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello.
Thanks for reading this -- it's my first time here.

Recently I had my laptop repaired - the plug was loose.
When i got it back yesterday (7-11-07) i had a NEW problem.

When i powered it on, instead of going to the login screen, a text
only screen came in (kinda looking like old school DOS) with all the
specs of my cpu.

the last lines read:
ERROR
0211: Keyboard error
Press to resume to setup

when i pressed F1 [which worked FINE - as well as some other
buttons i tried in Setup -- w/o changing a thing mind you] it went to
my log in screen.
BUT I COULDN'T TYPE MY PASSWORD OR ANYTHING

so i opened it up yesterday, and unplugged and replugged the
keyboard in.
powered it back up, and got the same screen message, but when i
pressed F1 - it went to my login screen and everything was AOK.
i turned it off at the end of the day and everything was fine.

this morning, the same pattern of events, but this time i could NOT
type at all on the login screen.
in SETUP - all the buttons seems to work.
but when i get to the login screen after i hit F1 - NOTHING ON THE
KEYBOARD WORKS

What the Hay? makes no sense to me.

I need help -- and bad!!!!

please? someone rescue me!

4 replies

by oh smeg

And tell them that the Keyboard no longer works properly. Then leave it to them to fix up properly. As with any repair on a NB the Keyboard gets pulled out they may have damaged the Ribbon Lead or done something else or maybe even replaced the M'Board which has a faulty IO interface on it and doesn't recognize the Keyboard properly.

They may have fitted a New M'Board that has different drivers to the old one and as you don't have these you need to get them to fix the unit properly. I'm assuming that the Loose Plug was the Power Plug from the Mains Adapter and that quite often means a new M'Board.

But no matter what they took on the responsibility to fix the unit so they should return it in working condition and not with such an obvious error occurring as this shows that it hasn't been properly tested after whatever repair was done to it.

Col

by ppookiee

thanks -- my next step will certainly be that....

i asked a tech friend of mine and he said to look up the
error message on Phoenix BIOS web page.

while i WAS able to find the error description there --
there are no directions on how to remedy it.

any ideas on that ?

by oh smeg

Is this set to the correct Time & Date?

If it is there is nothing else that you can do so return it so that the people that you paid to repair it can do the job that you have paid for.

If the RTC isn't set to the correct Time & Date set these and save on exit and that should cure the problem.

Are you hearing any Beeps from the speakers which are the BIOS Error Message that is put out by BIOS or is it just the [b]F1 & F2[/b] message?

Col

This discussion is closed to new replies.