Question Locked

2pcs+ a labtop and a wireless router

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have 2pcs, a laptop, print and a linksys wireless router.
I would like to connect the 2 pc and lab top wirelessly the correct way and also i would like all these computer able to print to an hp printer. Can anyone direct me in how to connect a home wireless network with a printer?

4 replies

by gaurav_mehta

TO CONNECT U NEED USB WIRELESS ADAPTOR FOR DESKTOP, FOR LAPTOP U CAN USE ETHERNET CARD OR USB ADAPTOR, FOLLOW THE INSTRUCTION AND YOU SHOULD BE ABLE TO CONNECT . FOR PRINTER THING SET UP REMOTE DESKTOP CONNECTION, IN MY COMPUTER CLICK REMOTE AND ACCESS RESOUCES OF ANOTHER COMPUTER SEE WWW.PCSTATS.COM TYPE NETWORKING FOR HELP

by sugalipsconsazon

i would like to thank you fo responding
i tried the network setup wizard and i'm able to see the the computers, and use the printer but if i turn off the computer the other computer won't have access to the printer ...did i do something wrong?

by enserng

Hi there...
Not sure why no one answered you as of yet, but that is what will happen as you are using the computer as a print server.

If you would like to be able to shut down the computer and still print, then you will need a wireless print server and wireless router hybrid of some sort. By installing the wireless print server / router, that will allow you to shut down the computer and print from the laptops, hence saving at least a small bit on the electric bill, not to mention should you want to get rid of, or change out, the current desktop platform.

The wireless print server / router should come with instructions, but basically all you need to do is set the IP addresses of your machines to 192.168.0.2 to 192.168.0.4 (all the way up to .255 if needed!) and use 255.255.255.0 as the subnet. Recommend keeping 192.168.0.1 open in case you want to add Internet access to your network at some point and use that for the internal IP address of your router.

Hope this helps, and best of luck,

Nikk

This discussion is closed to new replies.