Discussion Locked

Adding a Network Printer

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do l add a network color printer in a lan setup in 1997. The guy who setup network printers set them up using jetadmin, created the printers on the print server;so when you want to connect to printer, you logon to the network and click the printer you want and installation is launched. so how do l add more and newer printers to the lan??

2 replies

by curlergirl

If they are HP printers and you are installing them on the same server, then the Jetadmin port monitor is already installed. You simply add the printer, choosing local printer, when you get the option, click to add a new port, select HP JetDirect, and then you can either let the server detect the printer (by IP or MAC address), or manually type in the info for the printer you're adding. Then you would install the appropriate drivers as usual, share the printer, etc. The other (newer) way to install them is using Microsoft TCP/IP Printing - but personally I never thought it worked that well on NT 4 - I always used the JetDirect port monitor on NT 4 for HP printers. If they are non-HP printers, you may have to install a different port monitor - LPR or something like that, depending upon the type of printer.

Hope this helps!

by ctmoore1998

If you are using HP Jetdirects then go to HP website and go to driver down load search for network install wizard, download the niw for each OS that you may have. Next configure the printer with the correct IP configuration. Install the network install wizard on each workstation (or server if you want centralized print control) and run the wizard, it will walk you through connecting to the printer. I suggest that you have the print driver avail on a shared resource so that when prompted you can install the correct driver for the OS.

This discussion is closed to new replies.