7 replies
by csliyena Accepted solution
by hal 9000 Accepted solution
Run the Network Setup Wizard and do this on the computer connected to the ADSL Modem by USB Cable and tell it that it connects directly to the Internet and that other computers will connect through this computer.
If the rest of the computers are running XP finish off the Network Setup Wizard there. If not make a floppy as instructed by the Network Setup Wizard and run this one every other OS telling that computer that it connects through another computer on the network or a Residential Gateway.
Do the same thing on every XP computer telling it the same thing that it connects to the Internet through another computer on that Network or a Residential Gateway and when you've rebooted every computer you'll have a working LAN with a single Internet Connection.
Of course the computer that the USB Modem is connected to will always need to be running to have Internet access but besides that there should be no problems.
Col
by johan_claus Accepted solution
by hal 9000 Accepted solution
by johan_claus Accepted solution
Thx for the reply but couldn't download Firefox on client. So installed Firefox 2 after download on host and installed then on client. Problem persists.
This situation gives also a problem contacting sites of vendors of software for activation, upgrade, ... of the software. The browser mention "finding site" but then times out. Even contacting Mozilla website searching for updates didn't work.
Pinging the website name f.e. microsoft.com from client and from host gives good results.
Any other ideas for possible causes?
by why me worry? Accepted solution
I highly recommend using the ethernet port over the USB port if your modem has one. Being locked into a USB port will prevent you from using many commercially available broadband routers designed specifically for sharing a single cable/dsl connection.
If USB is the only option on your modem, you will need to setup what is known as ICS, or Internet Connection Sharing, from your Windows machine. It's not hard to setup, but your PC will always need to be on to share the access. It's much easier to setup a Linksys or Netgear router to share broadband than it is to mess around with ICS.
by johan_claus Accepted solution
Meanwhile found the solution. Problem was a difference in MTU between host and client. The shared internet connection is an ADSL with PPPoE, which uses 1454 als MTU. The new computer has by default a MTU of 1500. Changing the MTU in the registry of the client to the one of the host did the job.
Anyway, thx for trying to help
This discussion is closed to new replies.
Trending Storage posts
Sort by Trending