Question Locked

After Windows XP Loads, it reboots. Details inside.

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After entering safe mode and selecting "Disable system restart after failure" The following numbers are displayed on the bottom of my screen:

STOP: 0x0000008E (0xC0000005, 0x8062C26B, 0xB92CE99C, 0x00000000)

If anyone could point me in the right direction to fixing this issue it would be greatly appreciated.

5 replies

by Former member

Two things to check out.

1). Memory. Get some memory to test out.
2). Update you bios. (if your Motherboard is a year old it might need updating).
It is to do with how the data is written back and forth in the memory. If the motherboard is not fast enough then this could cause it.

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

by n.rodrigues87

Right now I am repairing my existing Windows XP, by booting from the disk. It is in the process of copying files.

I think it may be problem with my RAM because I just purchased and installed more. How do I update BIOS or fix the RAM problem?

by Former member

You update your BIOS, you will need to go to the makers website for either the maker of your computer or motherboard make website, I:E, gigabyte, Asus etc.
As for fixing the error of the memory, this is a two fixing issue. One is to update your Bios, so the the motherboard is up to date with the speed of ram and processor. (fixes bugs as well). Two is to replace the ram with faster (depending on your motherboard spec) memory chips. I get mine from Crucial:
http://www.crucial.com/
Or
Kingston:
http://www.kingston.com/
These two are the tops for memory.
If you give me the make of motherboard that you have i will give you a step by step on how (if the motherboard is not too old) to update your bios.

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

by rob miners

Test the memory.

You can test the memory by running Windows Memory Diagnostic that can be downloaded from http://oca.microsoft.com/en/windiag.asp. If problems are found check the steps below.

http://support.microsoft.com/kb/315335

Cleanup instructions for Backdoor.Rustock.B

Insert your XP CD and when you see ?Press any key to boot from CD? press a key. Now wait for the XP installer to finish loading up and you will be presented with the option to press R to Repair.

Press R.
The next screen will ask you which Windows? installation you would like to log on to. Normally the following will be listed:
1: C:\WINDOWS
Press 1, then Enter to continue.
You may now be asked for the Administrator password. If you know this type it and press Enter. If you don't know the Administrators password it may be blank. Just press Enter or type your username and password.
At the command prompt type: DISABLE pe386
Type Exit and the PC will restart.

At the taskbar, click Start|Run. Type Regedt32 and press Return. The registry editor opens.

Before you edit the registry, you should make a backup. On the 'Registry' menu, click 'Export Registry File'. In the 'Export range' panel, click 'All', then save your registry as Backup.

Locate the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\pe386
right click on pe386 and select Delete.
Exit the Registry Editor.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

This discussion is closed to new replies.