7 replies
by fury57
by dklippert
This is normal. Here are the references:
Microsoft Knowledge Base Article - Q285798
Perflib_Perfdataxxx.dat Files Accumulate Under %SystemRoot%\System32
The information in this article applies to:
Microsoft Windows2000 Server
Microsoft Windows 2000 Advanced Server
Microsoft Windows 2000 Datacenter Server
Microsoft Windows 2000 Professional
SUMMARY
Files with the name Perflib_Perfdata xxx.dat may accumulate under the %SystemRoot%\System32 folder, where xxx is a random number.
MORE INFORMATION
These files are generated by processes in the normal course of operation; however, files are orphaned when you do not shut down a computer properly, such as by pressing the power button on a computer.
Note: It is also possible that these files can be orphaned while a server is running. Microsoft is researching this problem and will post more information in this article when the information becomes available.
To delete the orphaned files, you can use an automated logon script.
by dklippert
Also:
Terminal Server Licensing
It is possible to have more than seven JETx.TMP files. If the server is powered off without using the shutdown routine or if the server is shut down inside an RDP client session, the JETx.TMP files are not cleaned up. Shutting the server down through an RDP client session is generally not an issue, since services are written to handle power outages by committing cached data very quickly. Administrators should be aware, however, that the normal shutdown procedures are not followed. If you shut down the server at the console, all services are stopped before the server shuts down. The server shuts down immediately, without stopping services correctly if the shutdown is performedthrough a client session. Because services are not notified, the JETx.TMP files will already exist when the server is restarted. The Terminal Server License Manager service will create seven new JETx.TMP files.
If JETx.TMP files numbered 1-7 exist, the server will create new files numbered 8-14. If you deleted files 1-7 (which could be done since they would not be open) and shutdown the system through the RDP client again, the new files created at startup would again be numbered 1-7. So, the highest numbered files are not necessarily the files that are in use
If left over JETx.TMP files are an issue, simply delete JET*.TMP files. Only the closed, unused files will be deleted. You cannot delete open files, or delete files in use.
by fury57
by loveanne
I used to have a similar problem before but I found out it's from an ad program like cmeII. However, to be sure if you are being hacked or not, why don't you install some personal firewall on your machine and run it as a service so it runs when you start your machine? There you can see which or who are connecting to your machine and which IP addresses your machine is connecting to. You will know then who are the friendly and who are the hackers. Here is a link at download.com where you can download some PFs.
http://www.dictionary.com/search?q=reeking
Good luck!
by fury57
by fury57
This discussion is closed to new replies.
Trending Security posts
Sort by Trending