4 replies
by charleyj4604 Accepted solution
by thechas Accepted solution
If you need a BIOS update for your new CPU, I believe you need to install the update before installing the new CPU.
Put the old CPU back in, reset the CMOS again, and the system should boot up.
Then, download the new BIOS and follow ALL instructions to flash the BIOS ROM.
Make sure the system boots up with the old CPU. Then, switch to the new CPU.
Chas
by oh smeg Accepted solution
Do any LED light up? Can you open or close any Optical Drives?
Do the fans run? If so have you tried changing the Power Supply with a Known Good one?
It could very easily be a power supply issue that is the problem here so open the case clean out the dust and other rubbish that has got sucked in and see what is happening inside. When you open the case use Compressed Air like Canned Air to blow out the Computer and hold any Fans to prevent them spinning nd generating power which can damage the M'Board. Try removing the RAM and cleaning the Gold contact spots with a soft rubber.
But the important thing here is with the original CPU do you hear any Beeps when you turn on this computer? Post back with what you hear or see and we will try to help you.
Col
by rob miners Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending