Discussion Locked

Auto Update repeatedly installs KB832483

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a network of 400 Windows 2000 desktops all with the same image. I have Automatic Updates set up to automatically download and install the updates at 12 noon daily. This has been set up for about six months and has been working fine. Over the past week I have noticed that there have been a lot of updates (daily) and I had not seem a corresponding number of security notices from Microsoft. I looked at the installation history from the Windows Update site and noticed that KB832483 has been reinstalling itself everyday (1/14, 1/15, 1/21,1/22, 1/23). I checked for updates on the Windows Update site and again it wanted to install KB832483, I allowed the install and re-booted. Again I went to the Windows Update site and it wanted to install KB832483 and the history now shows 2 installs on 1/23 (today). To the best of my knowledge this is happening on all of our desktops. Any ideas?

11 replies

by cg it

find out if the update actually gets installed by checking the list of installed programs add/remove programs.

If not, it's possible [but I don't think so] that antivirus software is dening script writing which would not allow the update to install.

A better way to apply patches, hotfixes,service packs over your network is SUS [Software Update Service] instead of the standard Microsoft Windows Update Service. That way you have complete control over what,where,and when updates get installed.

by cg it

Joe's right about this update. I took a look at his thread and yep it's a problem. I haven't deployed this one yet so my thanks to Joe Moore for pointing out the info on the Microsoft Community Newsgroups and my thanks to you for spotlighting the problem.

by timothy.sharpe

No, disabling NAV did not help. I did some more investigation and this is what I found. I have two PCs the have MDAC 2.5 and they received the KB832483 update on 1/14 but they did not keep getting it each day as the other 390 + PCs did. The other PCs have MDAC 2.6 SP1. Thinking it might be related to the version of MDAC I installed MDAC 2.7 SP1 on my PC, rebooted, and then installed KB832483 from the Windows Update site and re-booted. When I returned to the Windows Update site and checked for updates I received the message that there are no updates to install. So I guess that is it, the problem only happens on our Win 2000 desktops with MDAC 2.6 SP1. I guess I will be distributing MDAC 2.7 SP1 after I do some testing. As a side note none of the desktops (MDAC 2.5, 2.6 SP1, or MDAC 2.7 SP1) show KB832483 in add remove programs.

by joseph moore

Yep, there is a problem with the update and this hotfix on Win2K. I have been dealing with this issue on another question forum site for over a week now. In fact, my own Win2K machines are suffering from this.
The other question thread, with all of the info, is here:
http://tinyurl.com/26aeo

Take a look at the full thread. You will see the Newsgroup posts I found from Microsoft technicians, talking about how Microsoft is working on this, that there is a problem with Update and this patch.

Now, earlier this morning, a person did post something that worked for him. I was going to try this tonight, and see if it worked, but I will not be able to see if it really works until Wednesday! I am taking a couple of vacation days, so I won't be able to test if this posted fix works until I get back to the office. So, I cannot verify if the fix (posted by OlivierBataille at 6:43AM this morning) works or not. But I am gonna try it later tonight (Friday night).
My fingers are crossed!

Anyway take a look at the thread, and you will know all that I know on this.

Good luck!

by joseph moore

Ok, just to add to this.
First off, thanks DR for the compliment! This one was really driving folks crazy! I just searched through
microsoft.public.windowsupdate
newsgroup, and there are currently 590 references to this one hotfix; I browsed through the first 100, and MOST were about the hotfix reinstalling itself every day, so a LOT of people have this problem!
As of last night (Jan 23) it looks like the fix that is being suggested works! I tested it myself on my test Win2K machine, that originally had the re-installing problem from Windows Update. But, last night, I got it to stop!
The thread that I posted in my answer above does include the fix.
It really is that the MDAC that comes with Win2K SP4 is NOT in the minimum compatible list for this hotfix! This hotfix is rated for MDAC 2.6 and higher. Apparently, a normal Win2K machine with SP4 does NOT meet this requirement! And when you read the Technet article on this hotfix, it does say for MDAC 2.6 and up.
So, the Technet article on this hotfix is correct; it just doesn't emphasize that unless you had upgraded MDAC previously, the hotfix isn't gonna apply correctly!
So, I put on MDAC 2.8 on my Win2K test machine, rebooted, then went to Windows Update site and had it scan. It said I needed the kb832483 still. Ok. I let it install it.
Reboot again.
Went back to Windows Update, did the scan, and NOTHING was needed! It successfully detected that my system HAD kb832483 and didn't need it again!
Yeah! Success!
Now, I will check this machine in a few days (I am on vacation until Wednesday) to make sure that the automatic Automatic Update service doesn't try and install the hotfix again, but I don't think it will. It looks like upgrading the MDAC, then putting this kb832483 hotfix on, takes care of this Win2K problem.
This one has been fun to work on!

by timothy.sharpe

Thanks D.R. and Joseph for the feedback. So installing MDAC 2.7 SP worked for me and installing 2.8 seems to resolved Joseph's problem. I e-mailed Microsoft (Microsoft online assisted support) to inform them of the issue on Friday. Wouldn?t you think that Microsoft would send out a notice regarding the problem?

This discussion is closed to new replies.