3 replies
by oz_media
This is common on W2K and XP machines when they have a Blue screen of Death (BSOD). I believe the default config tells the OS to restart when a BSOD occurs, in order to narrow down the problem, you must be able to read these BSOD errors.
Here's how to disable Automatic Reeboot upon system failure.
Click START>SETTINGS>CONTROL PANEL>SYSTEM and select the ADVANCED tab, now click the Startup and Recovery button.
You will see several opyions here. The one you need to look at is the 'Automatically Reboot' checkbox under the 'System Failure' group.
Now if your computer has a system failure, the BSOD error will be shown until you reboot from the power button. Resolving the error should stop further BSODs and allow the computer to operate properly, including shut down.
This is most likely due to a program that just won't let go when the system tries to shut down.
If you are using a retail machine such as HP, Compaq or Dell, their website will have the latest BIOS update, good starting point. If you have a home made or 'white box' you will need to go to the motherboard manufacturer (pull the cover off to identify the board)and update the BIOS from their website.
Please post back the errors if you manage to regenerate them.
Good luck,
OM
by s.u.n
If answer one doesn't work, then try playing around with the power settings
1. Disable power saving in Control Panel.
If problem persists, disable it in BIOS also.
by robbinsr
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending