Question Locked

backup exec 10d - multiple incrementals to 1 tape...

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running BackupExec 10d on a Dell PV-122T LTO-2 autoloader set (at the device level) for Sequential loading of media.

I have set up an incremental backup job to go onto any of seven 200Gb scratch media tapes. my job is set up with the following settings:

For "When this job begins," I've selected "Overwrite Media."

For the Media Set:

I've got "Overwrite" set to "Infinite - Don't allow overwrite."

And for "Append Period," I've got "Infinite - Allow Append."

Now, when I run this job, instead of appending all of the week's daily incrementals onto one tape (each incremental rarely gets above 20 or 30Gb and each tape holds 200Gb), it wants to put them on SEPARATE tapes. I would expect that with my media set allowing an infinite append period, it would just keep appending subsequent incrementals to the same tape, as long as room remained on that tape.

Anyone of you good techies have any suggestions as to how to get BackupExec to dump all incrementals onto ONE tape (assuming, of course, that there's room)?

BTW, I know this is possible, because my predecessor (who has since become incommunicado) had it working.

Thanks a million in advance.

8 replies

by brenton keegan

I don't know about 10d, but in 12d you can specify whether or not you want a backup job to append to media.

You can tell it to not run the job if it doesn't find appendable media or you can just tell it to overwrite if it doesn't find a tape to append to.

So if all the other tapes in there are scratch media, unappendable or marked as overwritable it should write to the only appendable tape.

by bormes

you're right. in my media set, i can choose both my overwrite protection period and my append period. these settings don't seem to make any difference one way or the other in terms of allowing me to 'stack' more than one incremental backup onto one 250 Gbyte tape.

anyone have any further ideas? i want to be able to put multiple incremental backups (SAME media set and each incremental is never more than 20 Gbytes or so) onto ONE 250 Gbyte tape.

by brenton keegan

Your media set settings could be disallowing appending.

To be honest I haven't really done this. Honestly I don't know how you get the tapes offsite every day. If you're just leaving that tape in the drive you'd be better off doing a backup to file.

The whole point of tapes is that they are fairly cheap removable media that holds a lot of data.

If you're not taking the data offsite every day then I'd recommend you do so. By not doing so you are leaving a significant opening for data loss.

by bormes

and i agree with your main point. i too suspect that the problem lies with either the OPP or the AP or the way they're interacting with each other. i would THINK, though, that having an infinite append period (AP) for the incremental's media set would allow more than one incremental to be piled on to one tape. my goal is to have one tape (and its corresponding media set) for the full backup and then another (with its own media set) for the four following incrementals.

my predecessor DID have it working somehow, but he's no longer in the picture.

incidentally, i gave you a click on "helpful" for coming back for second helpings. thanks a million. i appreciate it.

by brenton keegan

Taking a backup tape offsite every day. I usually just take it home with me.

If you have a fire in the middle of the week you will lose data.

Tapes are cheap. 20-30 bucks. If it were me I'd just do differentials every night each to its own tape and take them home the next day. This method is easier to manage, simpler and more comprehensive.
I'd drop 90 bucks (or 180 if I want 2 weeks worth of diffs at any given time) in a heartbeat. It's not a lot of money and it really really cover you better.

That's my recommendation, do with it as you will.

Thumbs? Doesn't look like you did.

by bormes

... trouble is, we are in severe batten-down-the-hatches mode in terms of spending money. even something as trivial as a batch of tapes is going to get the hairy eyeball.

the thing is, my predecessor HAD it working somehow.

thanks again for the reply! i think the thumb worked this time, too. :-]

by brenton keegan

why you think it's important.

There are a number of articles out there that describe the statistics of what happens to companies that suffer significant data loss. If your CEO cares about his/her company at all, he/she will invest a few bucks into protecting the company's data.

This discussion is closed to new replies.