Discussion Locked

Blaster worm trouble

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am working on a persons computer infected with blaster. OS is XP, firewall on, Installed norton internet security and turned on norton firewall. changed settings for Remote Call Procedure and removed virus with symantec tool, but still unable to connect to internet. Connection is through NIC (via broadband wireless)and led on Nic is blinking rapidly. Internet setting appear to be correct. Any help would be appreciated.

4 replies

by tech_wiz03

Had similar trouble with adsl modem on a nic. Dispite what my ISP tells me that a rapid adsl-act lite doesn't matter and that only concern needs to be that adsl-link and ethernet-link lites be steady I have found this to be false! If your adsl-act lite is blinking rapidly it MEANS that modem is being bombarded with noise and/or traffic which can be sufficiant to totally impeed operation.

First steps: Make sure the modem either cable or adsl is NOT any closer than 2.5 feet of PC, Monitor, TV , Microwave Oven or any other high EMI device. This will reduce any EMI interferance with signals. If a cable modem make sure you do not have a cable in use with a broken sheild as this seriously impeed signals by letting the cable act as a big power antenna for EMI reception.

Step two: check your cables and replace if in doubt for ADSL check your microfilters and also put a phone onto the line and listen for any signs of degraded signal.

For wireless broadband note that locations of antenna's and placment of componets is more susecptable to interferance.

hope this helps
rick

by heinrichs

Install latest windows SP's and run windows updates. That will resolve the traffic issue.
After you have run the patches, run the symantec removal tool again.

H.

by kwduke

Make sure you disabled the System Restore in XP.. otherwise the tool might not have removed the blaster worm.

This discussion is closed to new replies.