Discussion Locked

Blue Screen on Shudown Win2k Pro

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

Whenever I shutdown my Win2k Pro I get the following error message:

STOP (ADDRESS) DRIVER_IRQL_NOT_LESS_OR_EQUAL
*(ADDRESS) - ACPI.SYS (sometimes ntoskernal)

Beginning dump

How do I resolve this error message?

Regards,

Minhaj.

12 replies

by vladimir b. kropotov

DRIVER_IRQL_NOT_LESS_OR_EQUAL occurs then driver makes page fault on Dispatch level priority or higher. It possibly, that one of the drivers which you use, is incorrect. Remember, maybe you install some new devices or drivers before system crashes.

by dc1

Typically a driver issue. You could try re-applying the service pack to update the file.

by d.walker5

Answer # 1 is right on target. I suggest you disable all third-party filter drivers, such as backup programs, virus scanning programs, and disk utilities. Make sure that any new hardware you installed appears on the Windows Hardware Compatibility List (HCL).

by joseph moore

I have seen this also, and when it is ACPI.SYS, then you are having a conflict between the drivers that control the UPS power functions and the power supply in your computer. Basically, Win2K is issuing a "shut down the power" command to the BIOS onthe computer, but the command is not being carried out due to a conflict. When this happens, you get the BSOD.
I have seen this more than I care to think about!
You will have to look on the website for your computer's manufacturer, and look for BIOS and/or power control driver updates and install them. But on the last 2 machines that did this to me, I could not solve this one. A couple Compaq Deskpros that were upgraded from NT4 to Win2K had this problem. They worked in NT, but the Win2K upgrade upgraded the UPS drivers, and they were not compatible with the hardware.
Compaq had several different versions of patches to try and fix this, but I never did get it to work.
I would up formatting and reinstalling Win2K, and that took care of it.
So, good luck.

by joseph moore

Which Deskpro model do you have? Deskpro EN? Deskpro EP? Deskpro 2000?
You will have to search through their knowledgebase to find the patch for something like this. It is not in the normal Smartpaq section.

by minhajlk

Hi Joseph,

My computer is also a Compaq Deskpro running Win2k Pro. I checked the HP site for BIOS patch, they did not have a patch related to the UPS Power problems. Which patch should I try, I'd appreciate your help.

Regards,

Minhaj.

by minhajlk

I re-installed (repaired) Win2k Pro. My system is back to normal.

Thank you all for your inputs.

This discussion is closed to new replies.