2 replies
by mattsigmon Accepted solution
by hal 9000 Accepted solution
Start with a Known Good Power Supply and strip down to the bare minimum the M'Board, CPU Heat Sink/Fan, Video Card and no RAM and then try starting. Listen for any error Beeps and work from there. If that works install one part at a time and reboot till it stops working.
Alternatively you could try a Live Linux to see if the system falls over as this is all loaded into RAM there is nothing written to the HDD so there is no damage to the drive in the way of corrupted File Systems. You can find a Live Linux at your Local Newsagent as a Cover Disc on most Linux Mags or download one from here
You could also try The Ultimate Boot CD either from the above site or directly from the writer here
And test the hardware starting with the RAM and HDD and then moving to the M'Board and other tests too numerous to mention. I wouldn't even consider leaving home without at the very least a copy of The Ultimate Boot CD and several copies of Live Linux for any diagnostic work they are as necessary as a Phillips screwdriver.
Col
This discussion is closed to new replies.
Trending Storage posts
Sort by Trending