Discussion Locked

booting from d: not c:

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How do you interchange c: and d: partition so that windows can begin to run entirely from d:

11 replies

by rod_eny2000

when your computer first starts hit the Delet button ....this will take you to the bios ....in the bios boot up select boot secquence that you want

by stroke311

Make sure you have your jumpers in the right place on your drives. WHY do you answer your own questions? Is it because you need points?

by thechas

For most PCs, you do not have the option of booting from different hard drives.
(I have seen this option on a couple of Intel motherboards.)

What you need, is a 'boot manager'

One such program is Boot Commander.

I have not checked for, or tried any free boot managers.

You might look at www.bootdisk.com
or www.nonags.com

Chas

by jose_12650

You speak of C and D partition and not C and D drives. So make the D partition active and install the operating system on the D partition.

by paulo.sedrez

Assuming you are talking about two partitions in one HD, and by Windows you are talking about Windows 9x/ME, the trick is to make both PRIMARY partitions, then use a boot manager (I use Smart Boot Manager) that can Shadow (or Hide) the first partition.

The problem is that you will not be able to access the first partition.Windows call C the first unhidden partition, and confuses it with the partition it boots from. It is a mess.

--Sedrez

This discussion is closed to new replies.