Discussion Locked

Built New Computer & Labor Cost: What is Fair Cost to the Client

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When you are asked by a business individual, friend, or
family member to build them a brand new computer from
scratch, and you agree to do so, the questions that comes
to mind are; (1) How much should I charge them for this
new computer?; and (2) How much should I charge for
labor?

When you look at what other companies charge who
specialize in computer maintenance and contracts, and
building computers, and the rates they charge, the figures
are staggering, and it is obvious that not everyone can
afford those rates.

Keeping in mind that many people are still clinging to
Windows 95 and Windows 98, that have not even began to
consider upgrading because they are happy with what
they've got, whereas someone else might think,
"hmmm...it's time for a change," and decides that rather
than buying a new computer from some of these high-
priced stores, and want to avoid the whole credit scenario,
they figure they can probably get a computer built to their
specifications liking and have all of their basic computer
needs met in terms of speed, operating system,
applications, and internet accessibility.

"If" you can get a brand new computer built for under $800
or $1,000, what do you actually charge the client? And
what is considered fair for both you and the client as far as
the time that gone into building it and the finished
product, and what is allowed by the industry?

Any thoughts on this?

10 replies

by jamesrl

Figure out how long it will take you to purchase, assemble and test the computer. Then charge what you think is a fair hourly rate. If you have no idea, look at what one of the big chains charges for service.

If you can get your parts wholesale, then I would add a reasonable extra on top of the parts cost. Ten percent is usually reasonable. Don't charge much over what is charged at a big retailler.

I'd be interested in seeing if you can actually make any money this way. The big manufacturers buy parts at such a volume, they can undercut most wholesalers, let alone retaillers.

James

by jdclyde

After they pick up a virus or malware and the computer needs to be formatted, who do you think that they are going to bring that computer to?

Do you think that they are going to offer to pay you to fix it or to fix if for free? Bingo, you just set yourself up to have to tell them no or provide free support for the next five years.

If I do make one I make sure they know that I will support the COMPUTER for a set time, but if they trash the OS that is NOT free.

Keep a ghost image of their system as well as a list of what devices that computer has and a copy of all drivers just in case because it WILL come back!

I would then add all the parts, including tax/shipping handling up. Time to research, order, assemble and install. (actual work time, not the time from when a CD starts to when if finishs).

I don't work for less than $20 per hour unless I am doing a favor for someone who does favors for me. As a favor they pay all costs and beer. I would also look at 5 to 10 % of the costs which is still a fair price because sure they could have bought them for less, but would they have know WHAT to buy?

Remember, they are paying for your experience as much as the current work or else they would do it themselves and save that money.

Get support covered very carefully or you will be expected to come over at nights and on weekends to fix this pig. If you plan on supporting this, add in extra money up front to cover a few visits and just tie that into the price.

I just tell them to get a Dell now because I don't want to deal with the support after the sale.

Good luck. (yes, I don't like dell right now, but name another game in town for home systems)

by unclerob

I used to do this and you just end up with headaches supporting this hardware. Unless this is a full time business for you that you don't mind providing these services don't get involved with this unless you know you're friend is going to bust your hump when they bust the pc.

$ for $, who can build a pc cheaper than Dell?
Some might argue Dell is garbage but I don't think so. The prices are rock bottom and you get can get a decent pc without monitor for $349 CAN (not including shipping or taxes). If they don't need an LCD monitor, another $100 CAN will get them a 17" monitor and they can always change the original config if they want something with a bit more power. Dell's latest offering is an Intel Cel 2.66ghz, 256mb ram, 60gb drive, OMB network, video & sound and a CDRW drive. If you can build a pc with these specs for less than $349 CAN using the same or better components and offer 1 year next bus.day on site parts & labor warranty, contact Dell and I'm sure you'll have a job waiting for you over there.

These days unless you're a serious gamer, programmer or into high end cad/cam or video editing apps, there is no need to build yourself a pc as you can't do it any cheaper than Dell. If you don't believe me, ask IBM,Gateway or Cpq/HP, apparently they can't do it cheaper than Dell either.

by nonamepipes

I don't build PCs for anyone outside myself anymore. It took up way to much of my personal time troubleshooting their issues after they took their box home. PCs are dirt cheap so send them to Dell, HP, Gateway or any other box house that has tech support instead of your house unless you don't mind taking care of their issues, getting calls and being available all the time. Good Luck.

by steve-kendra

One other point. To be honest I cannot make a better PC for the money without short changing my self. I discourage my friends from looking for a bargain from me. If they are willing to pay my fees (60.00 per hour for wiring to 120.00 hour for data recovery then we'll talk. I do some pro bono work for charities and strangers but working for friends is a good way to either loose a friendship or become freeware support for an indefinate time. (general advice is usually free and usually points them to someone else)..

by cg it

For small business I have them buy the stuff themselves. For labor, I usually charge em a flat fee instead of an hourly rate. #1. it usually takes far longer than one expects to build, test, install O/S patch, and make sure the damn thing runs without any error screens popping up than what they can afford. Further, word-of-mouth advertising goes a long way in getting new customers and keeping the one you built the computer for.

Family members I do the same thing except I usually don't charge em labor. Their family after all.

Friends I charge just like small business. Flat fee.

by bhunsinger

I work for a small IT support/reseller- we don't sell consumer boxes any more. High end business machines, small servers ok. Heck wholesale I'm pressed to order tha parts and build one myself that is cheaper than dell by the time I buy the os.
Best buy Sams Club circuit city have basic boxes.The warrentee's are 90 day trash unless you upgrade, But I'm not going to offer 1 year servce. I tell them Gatesway or Emachine because I know the standard support on Dell is lousy, and they are doing the proprietory parts thing. Emachines are more generic.
We make our money configuring and swapping data on the box they buy somewhere else.

by softcorp.us

Hello...

Q: What do you actually charge the client?
A: What he is willing to pay.

ABOUT FAIR
I like to be fair just a much as the next person. But, when you build and sell a computer to a customer, you're in business. Pricing isn't about being "fair". It's about the market, supply and demand, competition, making a profit, and staying in business.

WRESTLING WITH THE PC BUSINESS MODEL DILEMMA
Asking this question shows that you are wrestling with the PC business model dilemma.

Building and selling computers is a tough commodity business. It is a buyer's market. Just because you CAN do something doesn't mean you should try to make a business out of it.

Large established PC players are losing money, being acquired, shrinking, going out of business, or all of these. Just this week, IBM completed the sale of the "IBM PC" business to a Chinese company. Compaq was swallowed by HP. eMachines was swallowed by Gateway. Gateway and Micron are struggling. Packard Bell went bankrupt.

Some questions to ask yourself:

- How can you make a profit on a product that is a mature commodity, is available from many sources, and there are very large global players competing with you and with each other?

- Who is the customer that will buy from you vs. someone else?

- Why would they buy from you? Possible answers: They know you. You're local. You're nicer. You provide better support and training. You use only the highest quality components. You provide a longer warranty. You use open market components that are compatible vs. proprietary components only available from one manufacturer and are often incompatible (e.g. proprietary power supplies and motherboards).

- How much does the customer value what you offer vs. what the competition offers?

You may find good answers and work them into the business model that you use to operate your business. The answers you find will answer the pricing question.

But, it's not about being fair... :-)

-----Steve

by jdclyde

I think that will just leave him sitting there scratching his head more than ever. lol!

Sure gave him a lot to think about beyond just the assembling of a white box.

There is almost no money to be made in assembling computers unless you are putting together crap computers and charging top dollar, and as you pointed out that will only be good for the first few sales and then you are out of business.

Hard to make money on support as they expect you to keep it working even if it is something they have done. How many here have never run into someone who tried to clear up disk space and deleted system files and programs? Can you say "oops"?

This discussion is closed to new replies.