Discussion Locked

cable modem VPN access to Exchange 5.5

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm trying to access my office Exchange 5.5 mailbox from home using Windows 95(B) and Outlook 2000 through a cable modem and dialup VPN connection. Here @ home, I have setup an Outlook profile for a Corporate/Workgroup setup and know the server IP and account name & password and have confirmed they are correct.

Once I successfully establish my VPN connection to the server I can map any shared server drives/shares with no problem, but my email starts to connect and attempt to download the email but hangs and disconnects after about 5 seconds. No error messages are reported.

Any assistance would be greatly appreciated.

5 replies

by xpertdragon

It sounds like you may be approaching this the wrong way. If you have some similar network settings from your home connection off of a cable modem, it might make more sense to set up OWA, Outlook Web Access, that might prove to be an easier way for you to connect, and might even speed up the process of checking your email from home. If you are concerned about security, implement a SSL certificate on the server, such as https://www.mycompanyserver.com/exchange

Good Luck

Paul

by curlergirl

Is the Exchange server on the same physical server as the server drives you are mapping? If Exchange is on a different server, there are several possibilities. One is that the VPN connection may not be set up to allow you access to the entire network. If your RAS/VPN setup allows connection only to the RAS server, then this is why you can't open your Exchange mailbox if it's on another server. The other possibility is name resolution. Do you have DNS or WINS on the network for name resolution? If so, make sure your VPN connection is set up with STATIC settings for the WINS and/or DNS server - even if you're using DHCP to assign your IP address. Another way to get around this would be to put a HOSTS file (text file name "HOSTS" no extension, located in the Windows directory) on your Win95 workstation with the following entry:

[ip address] [Exchange_Server]

IOW, if your Exchange server's ip is 192.168.1.1 and it's name is Exchange, your entry would be:

192.168.1.1 Exchange

This will ensure that your Win95 PC can quickly find your Exchange server. I've found that even on a hard-wired network, some Win95 machines need this HOSTS file to prevent timeouts finding the Exchange server. Hope this helps!

This discussion is closed to new replies.