Seriously... pay someone that knows for their time. It will save you money in the long run.
If you can't / won't do that you need to a) analyse your needs and b) get a budget.
There are many parts to consider for part a. How many calls do you need to take or make? What level of service is required? What telcos and ISP services are available? What site are you going to use? What sort of infrastructure is currently in place? What call monitoring / logging / recording needs to be done?
Put simply outbound call centres are simpler than inbound. For outbound you basically need a phone per desk and enough lines to handle the calls and an autodailler if possible to maximise the number of calls made.
For inbound you will need to work out how many lines you need based on the expect / actual number of calls that come in. You will need to decide if its okay for people to hold or get engaged tones etc and base the manning / phone line levels against that. In this case you will need a phone system that can handle call routing and hunt groups etc.
For connecting to the outside world there is basically analogue lines, ISDN and IP. Analogue lines are fine - but its a line per phone. E1/T1 ISDN lines carry up to about 30 lines in one cable. They are quite expensive but second to none in terms of reliability. IP is cheaper though not as reliable as ISDN.
For outbound calls make sure you can route over the internet. It will save you a fortune.