Discussion Locked

cannot connect modem

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have and had big troubles setting up these com1/com2 etc plus the irq-settings when i tried to resinstall a modem. one pci-card was working when i had to reisntall windows 98se over the old one.
it is ams 5187 board with via mvp4-chip, integrated sound and video, ps2-key and mouse plus usb, plus one serial-port. in bios i have port 1 and 2. when i made changings i deleted all com1 etc in device-manager plus modem. then it was recognized again. i could dial up almost all up the time, but connaction failed. cable is ok.

10 replies

by nomac

If you are able to dial up and your cable is ok, then the problem is not on your end. If the connection has failed then you need to contact your internet provider, and have them resolve the connection failure.

by edsdave

Check your network settings in the control panel.
Need to have Microsoft Client, Dial up adapter and TCP/IP protocol. Dial up adapter needs to be bound to the TCP/IP protocol.

by cg it

humm, if your mainboard supports it [via a BIOS setting {re PNP aware O/S}, have the BIOS set to allow W98 to handle assigning resources to PnP devices. That way, you don't have to jocky around which communication port to use for a modem. Also, in my opinion, it's best practice to reformat a hard drive and "clean" install any Windows operating software in lieu of trying to install it again over an existing install. As the first answer said, if you can dial out with the modem, but not make a connection, the problem isn't on your end rather the ISP.

by europanorama

i will test a second pc with this card at the customers home. if its working, i will have to reformat the other pc-drive, right? i have looked at everything.

by luckygirl

Hi,
What I wonder is the exact error you get when you try to connect to your provider.
Most of the time it is a simpel solution on your pc, as wel as your modemsettings.
Also changing your modem from com 1 or com 2 to a com 3 or a com 4 port most of the time helps too.
Also check if the number you are dailing is still availeble and not changed.

This discussion is closed to new replies.