Discussion Locked

Cannot Login w/any account incl. admin

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This user changed his NT4/SP5 workstation setup from our domain to a workgroup and now all attempts to login are rejected, even the local administrator. We cannot reload WinNT and lose existing data.

19 replies

by gregory w. smith

Install NT a second time in another directory; then you can copy the new install's security settings over or use something like l0phtcrack to break the existing passwords (safer).

by Member 35772270

Use your Emergency Repair Disk for that system, your can restore the system setting, user info and previous password.

by bill cassada

Something else must be going on...simply removing a WS from a domain will not have the effect you describe here. If there is another local account, access the computer from the network and copy the data over then reinstall the system. If you have agood ERD you can use that and repair only the SAM. I also strongly suggest you tweak your user environment and remove the ability of users to play with the network properties. You can also install a second copy of NT and log back on to the domain, then copy the data over. Either way I something is funny here and I recommend reinstalling the WS to ensure you have a clean machine.

by jshearer

You can re-install NT using the Repair option - I've never lost data (other than account info) using this method.

by gregpip

I found that installing NT to another directory can be a messy situation. My solution was to download all the of the workstation data to an external hard drive then reinstall the operating system and all applications. This may have taken a little longer, but I had a clean install of NT.

by k.o.z.

Any of the above solutions will solve your problem but I agree - something else is going on here. I know this sounds too simple but do anyone change the administrator account password to begin with. Have you tried to log in with username administrator and a blank password?? Is there anoyone else that had logged on to that workstation - and therefore has a cache account??

If you've been through all that - I suggest using some of the hacking tools avaiable. I have used lophtcrack with great success. Good luck!

by mavrick

I agree with answer #4 or you can boot of a boot floppy and delete the SAM file if NT was loaded on a FAT partition.It is located at c:\winnt\system32\config\sam (no file extention). The admin account will default back to administrator and password blank. Note all other local account will be lost with this method or Answer4 (if the Rdisk never had account info on it)

This discussion is closed to new replies.