Discussion Locked

cannot view IIS website from in-house

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have IIS 4.0 running on a member server. I created a new web site (our only one) and configured it properly. Internet users can pull up the site from the outside world.

We have a DSL router that is NAT enabled. We have a Sonic Wall firewall that has to be NAT enabled also because of the router. We have one real world IP given to us by our ISP and our client computers (Win9x) are assigned internal IPs of the 10.x.x.x variety.

We cannot access our website from in-house using the www name, its IP address, or the web server's internal IP. The website's IP is "all unassigned" and I gave it a Host Header. When I type in the internal IP of the Web Server I get the NT Option Pack default page.
How can I view my web site from in-house?

Thank you,
Michael L Brown

8 replies

by computerdude

The address should be in the form of:

http:////

If that does not work either, in the IE options page under connections and lan settings make sure the box "bypass proxy server for local addresses" is checked.Lastly, your firewall may be blocking the traffic.

Hope this helps,
Dave

by mservino

I'll agree with the first answer which says that your firewall is probably locking you from accessing it. It's not uncommon to set up a firewall to block traffic comming in from the "Internet" when the originating host is local on the network. Other options you have are to create a rule on your firewall to route the trafic for you or to set up a DNS server in house to route the trafic and then make sure that everyone on your network points DNS traffic to that server. If you set up the DNS onan NT Server you can forward all requests that you don't have listed (i.e. the rest of the internet) to whatever DNS servers you currently use.

hope this helps
-Mike

by yuli

Yes, the Sonic Wall firewall blocks the traffic. After Sonic wall firmware v.5, you can not ping Sonic wall firewall's public ip address from your internal network! we had the same problem after we upgaded the firmware. The only way you can do is toinstall a internal DNS server. you also need to create primary domain zone for your public domain name, create a host record for your Web server and configure your DNS server to forward unresolved requests to your ISP DNS server. when you configure your client workstations, you have to put your internal DNS server on the top of the search list

by mbrown

Thanks for contributing advice to my question. I apoligize for not allowing points. I'm new here and I was trying to split the points between you and I accidently closed the question. I couldn't go back and modify. SOrry.
As a brief note: A friend suggested I add a SECOND Host Header for my web server computer name. Now when I type the name of the web server in my browser I get my web sites default home page. I found this an extremely easy workaround.
Thanks for trying.
Michael Brown

This discussion is closed to new replies.