Discussion Locked

Can't get rid of LILO

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Help! I installed Linux on a second partition on my HDD and had nothing but problems so I removed the partition. But I cannot seem to get rid of LILO - the Linux Loader program. (I assume it's in the MBR?)

When it boots it goes to the LILO screen, where I have to choose to boot Linux or Windows. Of course Linux is gone so if I fail to choose Windows (it is Linux by default) it trys to boot Linux and just sits there.

Any idea how I can remove LILO permanently?

8 replies

by liquidcoolit

Easy to do it ....

go to the command prompt and type in "fdisk /mbr"

If you are running Win2k boot off a 98 boot disk or CD and run it. will fix it straight away

Cheers ....

by mongous

Very cool! Thanks! I will give it a try tonight (at work now). So that will just clean the MBR only? (I am running ME)

by schannachie

Hi,

Answer #1 is very easy, and simple and OK !
Use the microsoft fdisk of the win OS you have installed, but if you use win 98 or ME fdisk you will have no diference. Best result are when you make a system disk and run the fdisk /mbr fora fresh boot disk. And so you will know that the fdisk is only going to create a new MS boot record. Make shure you don't run a linux fdisk ( the flag /mbr will not run in that case).

Good luck !!

by expertpc

Utilize and keep this program called ZAPDISK.EXE

http://www.websmithing.com/zapdisk.htm

It will wipe any disk no matter what is on it.

Copy it to an existing boot floppy. Boot off of the floppy, at the command prompt type zapdisk and hit yes

It will then obliterate the first few tracks of any drive.

I have seen fdisk /mbr not work on many an occasion.

Good Hunting

This discussion is closed to new replies.