11 replies
by dft3
I'm assuming that you have 98 installed on a FAT32 partition. If that is the case, then more than likely the DOS applications are having a problem with that file system. You may have to use Fat16 in order for this to work.
There's no way to convert from Fat32 to Fat16, so you'll have to delete the partition and then format it in Fat16 for this to work.
Good Luck!
by rar
by syscokid
As I understand, you are trying to copy or install from a CD. Then I would say you have a CD that's formatted for Unix using the RockRidge format or something similar.
The symptoms you are describing are exactly like those in this previously-asked question:
by rar
by john.cahill
Check the following registry Key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem, Win31FileSystem key. If this key is set to 1 change to 0 to enable LFN support.
Hope this helps
by rar
by kwflick
I have run into this problem before. It happens when you have a hard drive with more than one partition. What causes it has to do with how the drive was set up. This is caused by creating an extended partition using fdisk from a dos command window running in windows then formatting the drive in windows.
The fdisk and format commands should be run only from a boot disk. To fix this problem back up any files that you want to keep from the offending partition. Then boot with a boot disk containing fdisk and format. Run fdisk with large drive support and delete the offending partition then recreate it. Then reboot with the boot disk and format the new partition.
by rar
are you loading cd drivers ( mscdex ) in your config.sys and autoexec.bat. I found this same problem with this.
Andy
by rar
by rar
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending