Discussion Locked

Cd-Rom need help

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In Device manger the CD-Rom is working , but will not read the CD, it will try to run but stops,
the drive open and closes fine, but can't get it to read the disk , any help on this one,
connie
window's 98 SE ,gateway ,it's a standard CD-ROM that came with the computer
thanks

5 replies

by bigkenny

you could try using a lens cleaner and aslo make the sure the cd is clean if this dont work you probably need a new cd rom
good luck

by jschein

98SE... Gateway... Figuring at least 4 years old. If it does not read a DVD data disk or a regular CD (Not one your burned yourself from elsewhere), then the drive has bit the dust. You can purchase one online for 15-20 USD @ newegg.com or goto the store and pay the same or more.

That drive is gone.

by raman_ashley

if u know about any thing about hardware then
plz turn off urs pc
open screw's in the back side of cpu
then see where the cdrom atteched note down the connection of cdrom
and open the four screw's of cdrom
the cdrom easily come out
then see the back side of cdrom there are also four screw's
open them too
now clean the lans by cotton or any smooth cloth
then repack with the same prosess
take care

by tfulcher

My first question would be - what CD are you trying to read? Will the CD-ROM drive read any other CDs, but it fails on this one, or does it fail to read ANY CD you insert? If this is a burned CD, then your problem is most likely that either the CD was burned too fast for this older CD-ROM to be able to read it, or the media it's burned on is not compatible with the CD-ROM drive in question. If it's not burned, then your CD-ROM has probably bitten the dust.

This discussion is closed to new replies.