Discussion Locked

CD/RW Drivers w/ WinXP Pro

0 helpful
84 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Somehow all of my CD/RW drivers have disappeared from my XP Pro OS. The original list of drivers with XP included my CD/RW which is an ASUS CRW 4012a. All I can do with my burner now is to use it as an over-priced CD-ROM. Does anyone know exactlyhow I can get back the original CD/RW drivers that came with Windows XP Professional or the exact driver specific to my drive?

Please. No Generic answers. I have already tried reinstalling in device manager, and since the specific driver is notthere, it only loads the generic CD-ROM driver. (I have tried the registry hacks to get back the recording tab. Without the correct drivers, it won't even see media after that hack.) I'm trying to avoid formatting the drive and reinstalling the OS only to have to call Microsoft to reactivate it in 3 days. Then reinstall everything else.

The one who gives me correct, specific instructions to solve my problem gets all the points!

84 replies

by ann777

Download the manual first (same location in the comment) and read through it for further instructions. Since I don't have that drive, I'm hesitant to proceed further than this.

by thechas

I haven't check ASUS's site, however, almost ALL CD-ROM drivers from drive manufactures are for DOS mode access only.
Thes add a line to the boot files that enables mscdex so that DOS can use the drive.
DO NOT install the DOS driver unless you NEED DOS mode read access to the drive.

The Windows driver for talking to the drive is part of the IDE driver for the chipset on the motherboard.
(It would be worth your time to download and update the IDE driver for your motherboard.)

The 'driver' for CD-burning is part of the specific software that you use to burn CDs.

If you are using XP's built-in CD-burning software, I suggest that you manually re-install all the CD-RW compatability updates.
Your Re-install of XP may have blown these updates away.

If you are using a software package, follow the manufactures update and XP install proceedure.
For Easy CD Creator; you need to:
Install Microsoft's updates,
install Roxio's XP update,
install the software updates,
and install the Roxio XP update again.

For Nero, I believe that you can just install the latest version from the web site. After you install the Microsoft Updates.

Chas

by thechas

Another trick that often works for W2K and XP, is to remove ALL IDE controllers from device manager.
(Primary, Secondary, and root)

Re-boot, and Windows often fixes the driver problems on it's own.

Chas

by jondapicam

I only have the demo version of Nero because it was bought OEM. I tried the trick. Tried updating the driver manually afterwards. No driver.

by timwalsh

To get back the driver that came with WinXP, use the Add Hardware wizard and tell the wizard to search the XP CD instead of the hard drive.

by dmiles

Their are a couple of options within Windows XP Pro that exist that you could try,one is System Restore and Driver Roll Back,these options are available from a date that drivers would have been in operation on the system

Sites for drivers
1)http://simplythebest.net/drivers/cdrom_drivers
2)www.asus.com/support/download/download.aspx
3)www.drdriver.com/drivers/search

by jondapicam

Since the drivers no longer exist on my system, it cannot perform any rollbacks. System restore also cannot replenish drivers. The first site is down, the second site only updates the firmware, and the third site only will let me in if I pay, and they did not let me in far enough to verify the driver is the one I want.

by mike jones

Try the following, delete the CD Rom from Device Manager.

Move the CD/RW to a different IDE slot if available and then power back up, XP should recognise the CD/RW as as new drive and might reinstall using the correct driver.

by jondapicam

Been there. Done that. Since the driver is not present, it cannot install the proper driver. It can only install the generic CD-ROM driver.

by michael kane

If you have not installed anything critical since the problem began try a system state restore.

This is a built-in utility found:

%system boot%\system32\Restore

on my computer it is "C:\WINNT\system32\Restore"

The application you are looking to run is:
"rstrui.exe"

This should be a 5 minute solution to a very aggravating headache.

by michael kane

I've just found an easier way to do it:

1) press "Start -> Run"

2) Type "msconfig"

3) Press "Launch System Restore"

Follow instructions

by joseph moore

Ok, try this link:

ftp://ftp.asus.com.tw/pub/ASUS/cdrw/4012A

There are several files there. One of the files is "ASUS -wdrv511.exe"
I think that is the file you want. I downloaded it and extracted it. Within are several INF files, plus a couple executibles. Give them a shot.

hope this helps.

by ann_m

Do you have a copy of the burner software that came with the drive usually they come with nero or ez cd creator when you install that software it should auto recognize the burner

by jondapicam

I bought it OEM. No software came with it. Tried the Nero Burning free download to try to get it to work, but if Windows doesn't see it as a CD/RW, you can't burn.

by jondapicam

Okay, here's another way I think I can fix it, but I lack specific knowledge with XP. If I copy the drivers from another install of XP Pro and copy them over the file or files on my machine, would it restore it, and what and where are those files?

by lizzy

Hello,
This has been a known issue with XP. First, see if the drive is set to master and perhaps put it on it's own IDE cable if it's IDE. Second, make sure that the drive has CD burning enabled in the Properties screen for the drive (5th Recordingtab). If you have more than one CD drive, this may cause a problem if both are burners. Third, go to Microsoft's site and download their CD Burner update for XP and install it:

http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=70446CF9-5B5A-4733-A9AF-E6AD6A2D96A1

There are no spaces in the above URL. The article is Q320174 in case it doesn't load the site.
Hope this helps.

by lizzy

I just wanted to know if Windows XP was seeing the drive as just a CD drive or not at all. If it's seen as a CD drive, it's probably that update I mentioned previously.

Windows since 98 should not need software for a CD drive...

Once you get the drive recognized by Windows, Updated, then you would install your burning software.

The Chas's next post to uninstall all CD drives and IDE controllers and let Windows re-install is a great idea for this strange problem.

Please post a comment with an update on what's happening with this when you get a chance.

by jondapicam

It wouldn't take the updates due to the service pack already being installed. Even when all the updates were removed, it still sensed the service pack.

by thechas

What you propose is both complicated and risky.

It would need to be a PC with the EXACT same hardware.

You will need .inf files, registry keys, and possibly some DLL files.

There is software to help do this.

http://www.zhangduo.com/

Imyself do not trust this form of driver saving and updating, however, it may be useful as a last resort.

I would first, remove the drive from device manager.
Shut down.
Disconnect the drive.
Boot-up.
Remove any leftover keys for the drive in the registry.
Re-Boot, and check for any other latent keys or files.

Remove the IDE controllers from device manager again.
Re-boot, and allow Windows to re-install the IDE drivers.
Re-boot as needed to complete the driver installation.
Shut down.
Re-connect the CD-RW drive.
Boot up and see if Windows will properly install the drive.

I have to admit, this is the strangest lost drive / driver problem I have ever come across.

Remember, even if Windows does find the drive, you may need to run Windows Update to correct any CD-RW driver issues.

Chas

by bohicam1

Have you switched out the cd-rw? I have had this situation before and by putting in another cd-rw, I have no problem burning. Which leads me to believe that WinXP is not losing the drivers, it simply ceases to recognize a drive for no reason.
Good luck!

Mike

by jimdale

Ok, I haven't seen this i the answers or your comments and sometimes we overlook the simplest solutions. Have you tried shutting down, removing the drive from your computer, restarting, then shutting down again and reinstalling the drive? I have hadto do this with different peripherals and it has worked. If it doesn't, good luck!

by currera501

I have had the same problem you are having. The only diff. is I have a Yamaha CD/CDRW. After I installed windows XP I could not find my burner and I installed Roxio CD Creator 5.0 Platinum and the XP patch it still would not work. Then I came acrossthe fix. I installed Windows XP Plus,found that it has a driver in it for the cd burner,after I installed it then I installed Roxio again with the patch for XP and it started working and reconized my burner. But install XP Plus first then everythingnext. This should get you up and running.

by dmiles

If you have the XP cd then try extracting the driver from the cd by using
C:\Windows\System directory
Extract D:\WINXP_DRIVER FILE NAME.DLL /L C:\Windows\Sysstem

by thegodfather

Copy the files from the original disk within your CD, to C:\WINDOWS\SYSTEM32\DRIVERS and choose yes to overight the current driver files.

by abubin

How come no one thought of this?

Just install winXP over your existing winXP. Run setup from within winXP. This method would re-install all drivers. And it WILL NOT erase all your existing software and settings.

You guys are going the wrong way. Installing a CDRW does not require any drivers. WindowsXP generic drivers is good enough to run a CDRW. Plus, winXP comes with built-in support for CDRW, the built-in drivers will work fine. I have NEVER seen any CDRW drivers for windows. Only once I have seen this ASPI drivers needed to fix some problems with burning CD on win2k using Roxio EasyCD.

Thus, just install winxp again and see if it will fix the problem but I am 98% sure it will fix it. Oh yes, before that check and see if you have any virus which actually destroyed your drivers.

by jimdale

Me again, do you remember what events lead up to the system no longer recognizing the drivers? Did you just do an update, a service pack or any software installation? There may be a software conflict that is causing the problem. And last but not least, have you contacted Microsoft or the drive manufacturer? I hope you get this problem solved, I am curious what the correct solution is going to be.

by pcounsell

I have had this problem before. I tried countless things to fix. I tried everything from reinstall to putting in a new cd burner. After all of this I though what the heck and replaced the IDE cable, and that fixed it. Sometimes it the simple things we overlook.

by dcosgrove

Windows XP does not need a specific driver for that device. You may have one of two problems. Some CD writing software is not supported in XP, though XP itself has the capability, try removing and cd software. You may also need to update the firmware in the drive, I do not know for certain how easy it is to find the appropriate software through Asus, but it's a snap with Plextor.

by ltorre6508

Have You Tried going to the product web page? I went there for my scanner and my printer to update for xp. I was able to download programs to get things going.

by rich

I would suggest you go to www.goldenhawk.com the makers of cdrwin and download and install the aspi drivers for windows xp in the download area.
This will fix your problem. Yes an ide problem.

by roell

CD/RW drivers do not play big role there.
1)Install burning software, I prefer Easy CD Creator v5, then install latest update of it from www.roxio.com to enable the software to recognize CD burner of a high speed (higher then x24 I think.
2)Formatyour CD-RW media! With Easy CD Creator it is easy by selecting Direct CD format utility from the Applications menu of Roxio easy CD creator programme group.

by sanehpal

in your system do the following:

goto regedit
-->[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class

look for 4D36E965-E325-11CE-BFC1-08002BE10318

or other ID with a dvd/cd-rom class id.

if you can't find one.

goto you old system regestry which is locatd in c:\windows\system32\config\it is the one that says system.sav(your original system registry file)

create a temp key in your registery file for same class ID one that has dvd/cd-rom export it to a file. change the HKEY_LOCAL_MACHINE\temp\CurrentControlSet\Control\Class

to the correct HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class

and import it back into your registry you should now have a entry in your class that is correct. Reboot and you oldcdrw should work.

by phil.hall

Try this:

(1) Reflash the CDRW drive's BIOS
(2) Reboot
(3) Put your Win XP cd in the drive
(4) From the "start" button go to "run" and enter "sfc /scannow" (ignroe the quotes) and hit the enter key on your keyboard.

If the driver was present before flashing the BIOS and now it's gone entirely, this *should* replace it. You may end up rebooting afterwards.

by dcosgrove

Don't know if you got it fixed or not, but I noticed the "asus doesn't do there own drivers" in one of the threads. They don't do cdr drivers because thay are not necesary, here is a link to the firmware update.

http://www.asus.com/support/download/item.aspx?ModelName=CRW-4012A

hope you get it straightened out. By the way I don't see a reference to the burning software you use, did it come with the drive? What version is it.

by mjost

Found a note on MS' web site about checking if your DMA/PIO settings for the IDE controller, under Advanced tab, transfer mode, and making sure it is set for DMA and not PIO, sometime solves the problem.

by rrv

If you remember the last date when you burnt a CD, use the system restore on a date near to that. You will get all your setting as per that date.

by driv

Can you supply the following information on what is currently being reported: Plus the exact version of XP you're running OEM, RETAIL; HOME PRO

From the device mgr. under the drive properties.

[Driver Tab]
CDDrive being recognized:
Driver Provider:
Driver Date:
Driver Version:
Digital Signer:

[Driver Details]
Files listed and versions

Below are what 99% of all XP machines use, at least the ones kept updated with service packs! However, your writer may need a more specific one,it should still be listed.
And yes you can copy over them, however if they are not signed XP will copy back over (unless you turned the feature off) what is in it's valid driver area...so you'll have to copy over those also.
[Driver Tab]
CDDrivebeing recognized:
Driver Provider: Microsoft
Driver Date: 7/1/2001
Driver Version: 5.1.2535.0
Digital Signer: Microsoft Windows Publisher

[Driver Details]
C:\windows\system32\drivers\cdrom.sys
c:\windows\system32\drivers\imapi.sys
c:\windows\system32\drivers\redbook.sys
c:\windows\system32\storprop.dll
Provider: MS
File Version: 5.1.2600.1106 (xpsp1.020828-1920)
Digital Signer: MS

by spn

HI ,

You have not mention it , but have you installed SP1?

If not, download and install SP1.
Removed the device in Device manager.
Scan for hardware changes XP will(should) detect the drive correctly.

by alpha-male

Any luck with this issue? Still wrestling with it?
If none of this has helped, perhaps the time and effort spent are outweighing the cost of a new CD/RW....

Have you tried a differend CD-Burner in the machine?

Have you updated the CD softwarefrom MS?

Have you installed a full DVD burning software package (not just a demo) that specifically states it supports your CDRW?

Let us know where you stand on this...

by stan

Go to Device Manager. Remove the CD/RW from your PC by hightlighting it and click remove. Restart your PC. Windows should reconize the device and reinstall the drivers for it. Uninstall and reinstall the software that came with the Burner and download the lastest update for it. If you are using Nero you may not have burn rights. If you are on a network and you are not the admin you should go to www.nero.com and download the BurnRights software. You will have to log on as administrator to install it.

by stan

You cannot use the CD/RW without software. I suggest CD Easy Creator.

by tduval

Just for my 2 cents :
Did you know that NERO serial is model aware ?

In fact, a nero serial for Yamaha Writer won't work with any other make

by ramgarden

have you tried "rolling back" the driver?

go to: control panel-printers and other hardware
then to system in the task pane on the left.
(FYI a shortcut to system properties is right click my computer-properties or Windows key+pause/break)
now go to hardware tab-device manager button.
then browse to the driver currently assigned to your cdrom. Right click it and go to its properties. Click the driver tab and try the Roll Back Driver button. I broke my driver before and took the RW from myCDRW. This fixed it for me. I hope it works for you.

by ahkit

The /i386 folder on your Windows XP Professional operating system CD contains Driver.cab, which contains all the drivers for Windows XP. If you need to replace a file in your Windows XP Professional installation, you can use the copy or expand command in Recovery Console to extract the needed driver from the operating system CD. Use the copy command if you want to replace the driver.cab file. Or you can extract the driver from driver.cab using the expand command. The location of the driver.cab should be located in your local disk C:WINDOWS\Driver Cache\i386 folder.

This discussion is closed to new replies.