5 replies
by joseph moore
Nope.
In NT4 domain model, you have 3 options in how you get to install a NT4 Server.
1) PDC
2) BDC
3) stand alone member server
When you add a NT4 Server that is a stand alone server in a Workgroup and add it to a Domain, that NT4 Server will only be a member server of a domain. It cannot be a BDC or PDC UNLESS you reinstall.
You can't add a NT4 Server to a domain and promote it to any type of domain controller status.
So, no, you can't do what you want to do with your existing servers.
You can make a workstation a PDC by doing the clean install of NT4 (choosing PDC during the install), and then set up another workstation as a BDC (again, making this choice during the clean NT4 install).
But, you can get a low-end servernowadays for cheap. The lowest price Intel chip server at CDW right now is only $505. I suggest you pick up at least one of these and make it the PDC.
If you need to do this really cheap, then make your workstation the BDC. But at least get a machine that calls itself "server" to be your PDC. Workstations as BDCs can be done (I did it myself for a few months until I could get approval to buy a real server as BDC).
hope this helps
by jlbpotter
by ronnonf
Sorry but you cannot promote a standalone into a PDC or BDC. If you want to go this route I would suggest building the PDC and domain. Consolidate your servers and install NT as BDCs then move the data back.
A better and more simpler solution wouldbe to mirror one of your servers. Upgrade that system to Win2k server. Run DCPromo - this will set the system as a domain controller. Just realize that MS suggest upgrading the PDC first which means while you are doing this I would suggest remove the PDC.
by jlbpotter
by jlbpotter
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending