Discussion Locked

Chime in about Windows XP

0 helpful
124 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is page 2 of the discussion. Read the opening post

124 replies

by hargerd

This is By Design (has been since Windows 2000 - NT 4.0 DIDN'T!)

Ideally you should create a user with administrative rights and a strong password(which doesn't change) and use that as logon account for services.

Most should run as "system" account anyway

LFT

by kirtishah

While booting the system, instead of the startup sound, I hear a jittering sound and all for unknown reasons. Everything worked well until I installed Win XP. After giving (the system) a break of 5 minutes, every music seems to sound perfect. But thats not all, sometimes same jittering can occuring again while listening to music on the system. Any clue to this? (Sound card worked fine when I had 98 or ME)

Another problem is the IE....after remaining open & idle for long time or too many IE windows open, it closes automatically with an unexpected problem. Also asks for sending information to microsoft. Wondering what do they do with so many same kind of problems sent to them, do they really try and solve it!!!!!!!

Drop in few lines if anyone can solve these problems.

by lucky bud

I've had this problem for about six months and no one can provide a solution. When I try to open a file by double clicking on it in Windows Explorer, The Hour Glass will sit there for a good 30 to 45 seconds before the application opens and the document can be seen. This occurs in MS Word (.doc), Excel (.xls), Powerpoint (.ppt), Access (.mdb), Acrobat (.pdf) or almost any other application that displays a file. It occurs both from the client and over the network. Opening the app from Start/Programs is instantaneous, a this used to be. Can anyone help?

by brasscap

Sounds to me like the delay is while XP swaps something out to the paging file. More memory usally speeds this up. Open Task Manager (right-click on a vacant space on the Toolbar) and then on the Performance tab. This will show you how much memory is available at the moment, and how much is being paged.

by arthurp

Hiya,
Apologies, but I'd set the swap/paging file to 3x the physical memory installed & make it static that way you get past the problem of fragmentation
Arthur

by gabriella

It seems there is a clutter in your PC, and not enough memory in windows.. clean, deletes unwanted files,,, scan your disk.. it this does not help you need more memory. more RAMS.. I had this problem years ago... the Rams took care of this.. also is your PC up to it.. too many new hardware on a old PC slows everything down...

by damianthex

Microsoft can come in handy once in a while. They have posted a link to create boot disk floppies for XP Home and Pro. You will need six floppies. The links below will give instructions.

Home Edition
www.microsoft.com/downloads/release.asp?releaseid=33290

Professional Edition
www.microsoft.com/downloads/release.asp?releaseid=33290

Make sure you download the correct boot disk your for edition of XP. These operating systems cannot be booted from the wrong disk.

by arthurp

I guess that I may be using a long shot here .. but agreeing with JT; if you're operating within a corporate enviroment, (two or more machines), sureley it would be better to have a standardised build that can be deployed to a machine upon receipt - this is definetly something that I do irrespective of the supplier, thereby ensuring that I am able to control the base level deployment, along with the AV updates. Currently I'm working with an individual build for each model, but trying to produce a "single unified build" that can be installed upon each machine irrespective of hardware spec - this is using base level compliant drivers, which XP will update from the SUS. Grateful for any advise - especially lessons learnt in light of previous experience
Thank you
Arthur

by bookhout

I still am looking for a driver to run my parallel port scanner. It is a paperport One Touch. I have been unable to find any parallel port drivers for XP.

by rctii

Your links to get XP boot floppy files have the same link--- just to XP Home. What's the XP Pro link?

by j1sigrist

I am looking for a Site that can give some info. on this BCCode error.

Google has nothing about this error ...

BCCode : d1 BCP1 : 65440B23 BCP2 : 00000002 BCP3 : 00000000
BCP4 : F88F7E35 OSVer : 5_1_2600 SP : 1_0 Product : 768_1

Thanks,
Jerry

by mwrmwr

[newsletter 12thFeb2004]
I downloaded this, opened the zip and read the README.
This refers to WMIC
"...Since the Process Explorer script relies on WMIC, it will only run on Windows XP--it won't run on Windows 2000.
"

...I suspect that README should indicate that XPpro is required as this was nowhere to be found on my XPhome system but was present on my XPpro system.

by gabriella

Did you tried your mouse... click on right side on your task bar..it shows "task manager" Hope this help.

by gabriella

I have XP pro and use password/passwords and lock this password for myself only.. no one can enter my PC

by autoc

I have a single image that can be cloned to all 5 of my hardware platforms. After spending time with what passes for documentation for Sysprep, I determined that if your other hardware platforms do not have the identical mass storage controller as your image platform you will get the BSOD after a restart. You need to add entries to the sysprep.inf file. One to populate the inf file with entries for all the mass storage devices supported by XP. Also, if you have video, network, sound or other devices not supported natively by XP or want to use updated drivers then those need to be copied into a folder pointed to by an entry in sysprep.inf. When you run sysprep make sure you select detect "plug and pray" on restart.(or words to that effect)

by arthurp

Hiya,
Please try this location for the XP boot discs ....
http://www.bootdisk.com/bootdisk.htm

You create six boot discs which will work for those systems which are unable to boot from CD/DVD drives.

I've been using them as a 'fall-back' for over a year now with no coplaints ....

by lawrephord2903

wanted an explanation from the manufacturer /ecs how the chipset is constructed and programmed in that style to cause such incompatablity ? WHAT INSTRUCTIONS IS THE CHIPSET WORKING ? AND WHAT OTHER INSTRUCTIONS WILL THE CHIPSET WORK WITH ?

by edterry0101

I can not find where to go to set these up. When I open a folder that has multiple files in it that I want to print, I select the files, and then right click to get the menu that has the print function. After selecting print, XP then opens a dialog window to "move" the files.. when I click cancel it then prints the files, but I have to cancel the "move" dialog each time. HOW do I correct this to skip "moving" and just start printing? TIA!

by kronosei

adjust your domain policy settings for your workstations; in the GP for the OU, set the workstation security policies to sync your admin logon names/passwords. use it here (all XP/2k3 domain) works great.

by finmedmgr

Had it , lost it, got mad and fixed it myself. Seems like I get intelligent when I get upset. Means I have to put my thinking cap on and not so much in my own auto mode.
Thanks anyway

This discussion is closed to new replies.