Question Locked

Cisco 1811 Internet access

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am currently learning the CCNA qual and luckily at the same time I have a 1811 Dual WAN to play with.

My problem is, I have a T1 wireless internet (not network) connection that is fed into the office via an RJ-45 cable of a node on the roof. This connection has 10 static IP addresses on it. I quite simply want to share the interent connection to the LAN but I am lost. I do not know of any way to set a static ISP IP address.
Any ideas?

Any help would be sooooo grateful.

5 replies

by barrieduke

I'm no expert ... but assume you are behind a router which has a static IP address assigned to it and that it is this router that has assigned 10 addresses for your LAN.
Each pc/laptop needs a connection made by network connection wizard. This normally sets up an automatic connection. There can be problems connecting a machine with Vista -in my experience.
Working with XP - go to control panel> network connections> and right click the WLAN connection> Properties - scroll to Internet ProtocolTCP/IP and click, then click properties - you can then choose to add a static address, the subnet mask should appear if clicked in box, and the default gateway on the router which will probably be the preferred DNS Server address that must be added.
Otherwise http://search.techrepublic.com.com/search/static+IP.html

and/or http://www.cisco.com/en/US/products/ps6187/index.html

by spammethisway

The node on the roof is simply a wireless node with line of sight to the ISP. The ISP has supplied the IP addresses for the companies broadband usage.

The 1811 is (supposed to be) sat in the office, then the 1811 router will connect to a switch and 25 PC's, 2 DC's, DNS and DHCP servers. The 1811 simply needs to act as a router/NAT and convert the ISP provided IP into a distributable address for clients to connect through. The additional IP's would be used for e-mail server etc.

by cg it

copy and paste so we can see what your config is.

by derekcrocker

Were you able to resolve this issue, I have a very similiar setup we want to implement.

This discussion is closed to new replies.