Security

Ask something
Discussion Locked

Cisco PIX Firewall command

0 helpful
4 replies

by kwoerner

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have to program our Cisco PIX firewall for a couple of situations, and I'm not sure exactly what commands to use. We use NAT inside with a 10.x.x.x network.

In the first situation, a computer at our school needs to be able to submit and receive files from a Microsoft Sequence Server at the State office on port 1443, or so they tell me.

In the second situation, I need to setup a public/routable ip address on one of our inside machines so that any outside ip address can communicate with it. I believe I need to use the "conduit permit" command, but I'm not sure on the grammar on either of these questions.

All help appreciated.

4 replies

by beecee

access-list acl_in permit tcp host 10.x.x.x host x.x.x.x eq 1443
access-group acl-in in interface inside

and
static (dmz3,outside) x.x.x.x 10.x.x.x netmask 255.255.255.255
access-list acl_out permit tcp any host x.x.x.x any
access-group acl_out in interface outside

or conduit permit | deny protocol global_ip global_mask [operator port [port]] foreign_ip foreign_mask [operator port [port]]

by beecee

oops

access-list acl_in permit tcp host 10.x.x.x host x.x.x.x eq 1443
access-group acl_in in interface inside

This discussion is closed to new replies.