Discussion Locked

Cisco VPN client can't ping with VPN on

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have had many problems with this. I am using Cisco VPN client version 3.6.2 (3.1 and all other versions experience the same problem) to connect to a PIX firewall (acts as VPN server).

Windows 98/95 clients never have any problems, however, Windows 2000 and, especially, Windows XP clients can connect to the server but they cannot ping after the VPN session is established. What is going on? On the client side, the router is a Netgear MR314. Resetting the router sometimes works but most of the time it doesn't. I know this is not the router because I tried this setup at 3 different locations with different routers. I think I need to modify something in the OS.

Help...

4 replies

by dao251

Are you sure you are not using CISCO VPN Client and MS IPSec simultaneously?

In order to use Cisco VPN Client you must stop IPSec Policy Agent service on your 2000/XP as stated in Cisco Release Notes.

HTH,
Dima

by psx

I checked this. The IPSec Policy Agent service is disabled. When you first install the Cisco VPN client, the installation routine asks you to disable the IPSec Policy Agent. I did this. I went back to double-check and sure enough the service is disabled.

Oddly, the VPN works with a dial-up connection. Could be the router?

This discussion is closed to new replies.