Discussion Locked

com port 2

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My home scanner will not function because an error
says com port 2 busy. How do I check to see what device is taking over com port 2?
I have Windows 98 SE on my computer.

1 reply

by thechas

Right click on the My Computer Icon,
Select Properties.

Click on the Device Manager tab.
Click on view devices by connection.

Expand the branches as needed to see what you need.

Now, I am not aware of any scanners that use the serial port.
What port is the scanner connected to?

If parallel, you may need to:
Change the port type in BIOS settings to ECP/EPP.
Turn on your printer.

If USB, you may need to install drivers for the USB port on the motherboard.

If it is indeed connected to COMM2, the most likely conflict, is that a modem was installed when COMM2 was inactive.

From the Start Menu, select Settings, then Control Panel.

Double Click on Modems.
Select your modem, and click on properties.
See if you can change the COMM port used.

You may need to remove and re-install your modem in order to change the COMM port used.

Chas

This discussion is closed to new replies.