Question Locked

compaq evo d300 minitower problem

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hi i hope some one can help with this: I've just acquired a compaq evo d300 minitower that powers on but shows a constant red LED next to the power button. I've had a look at HP/Compaq's tech support site and trouble shooting guides for this pc but can only find references to flashing LEDs that indicate power supply problems. I gather that in normal operation the LED would be green, and the guy i boughtit off is adamant it was ok before he sent it by courier. Obviously, it could have been thrown about by the courier and damaged but i was hoping to find a fix for it rather than going through insurance claims. I'm new to this site (and computing in general!) so any advice would be gratefully received. Thanks, Jim.

3 replies

by hal 9000

Then you can check that all the power connectors are actually still attached. In transport they can work loose and stop making contact. You can also pull any RAM modules and reset them in the sockets that they where originally fitted to as another option as well as any Plug in Cards which may have become loose in transit.

If none of that works I'm afraid that it's an Insurance Claim as that is the easy stuff covered. Anything more involved will require both the availability of spare parts and a good technical skill to properly trouble shoot the system to find the problem.

Col

by jgalla

Thanks for the advice but i managed to find a troubleshooting guide online and found that a red power LED indicates 'CPU not working or not properly seated'. It didn't look 'unseated' but i suppose these things have to be spot on, and after removing and replacing the processor... BINGO!!! all seems ok so far...Anyway i appreciate the feedback on my question, all the best, Jim. ps hope the weather's better in Oz than in 'the Old Dart'.

This discussion is closed to new replies.