Question Locked

COMPAQ Laptop - windows won't fully boot alone, or from CD

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi

I tried to switch on my laptop on Tuesday night and left it running - only to discover 10 mins later that it still hadn't loaded correctly. There was an error message saying that there had been problem with my Registry, so it had been recovered with an autosave, which was successful (or something like that, I didn't actually read it properly). When I clicked OK, it carried on as if it was going to load windows XP, but only got as far as the blue windows screen just before it asks you to choose which account you want to log on with. So I switched it off and tried again - same thing, only without the error message.

I used a Startup disc last night, with no effect, so used the bootable Windows CD, but it still carries on to the same screen and stops. I've changed my setting in BIOS, but it won't seem to load from the CD at all (the CD is being read), which means I can't use the Recovery Console or reinstall. I have also tried the Last Known Good Configuration option, to no avail.

Can someone help?! Thanking you in advance!!

3 replies

by tintoman

That your cmos settings are not correctly pointing to your cd drive as a boot device, remember that if your machine sees the hard drive as bootable you will be required to press a key to select the option to boot from the cd.
If you are sure you have all that correct then go back into the cmos settings and disable all boot devices other than the cdrom.
if you still can't boot you might have issues with the disc or the drive itself

by oh smeg

And get a copy of the Ultimate Boot CD available to download free from here

http://tinyurl.com/3jnpy

Boot off the Ultimate Boot CD and test your hardware till you find out what is wrong. Start with a memory Test followed by a CPU Test and HDD Test. If none of those show a problem continue with the other available tests till you find what the problem is.

Once you know what is wrong you can then either decide how to proceed or post back here and ask another question.

Col

This discussion is closed to new replies.