Discussion Locked

compaq won't fdisk from floppy

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a compaq presario 5440. I can't FDISK with a windows98 floppy! Why?

6 replies

by x1deimos

Grrr... Alright if your still with me, copy the link I posted and paste in your address bar, when it goes to the link it puts a %20 in the link and it doesn't go to the page, Sooooo then Remove the freaking %20, and you will finally get to the page.. whew...
Sorry for the inconveince but can't edit my posts :)

by fred07

Hi

At first command prompt "fdiskmbr" or is it "fdisk mbr"

Then reboot to floppy and go

by com works

Hello,
I have ran into this problem before. Several things you can do.
1. Go to my web site @ http://com-puterworks.com/private_page.htm and get a new boot disk. Try that first.
2. At the same site open and try the Fdisk Debug and follow the directions or click on the link for Fdisk commands.
3. If you want to wipe all hard drives completely download DBAN at the same site. Put it on a floppy and start your computer. When it loads type autonuke and hit enter. It will wipe all hard drives beyond recovery. Fdisk will work after that.
I recommend steps 1 and 3 if you are intending to do a clean install of an operating system. Backup anything you need on CD if you can (Favorites,E-mails,Documents,Pictures,Drivers,Music ect...).

This discussion is closed to new replies.