Hi. Pls follow these steps to configure ur router- hope u're working with XP.
1-power on ur pc
2-make sure ur router is powered off!
connect ur router to ur pc: use a serial cable with rj-45 to db15 ends(this cld be that blue cable that came with ur router)
3- the rj-45 end goes into ur router's consle port(marked blue); the db15 end goes into the COM port behind ur pc
4-go to start/
all programs/accessories/communications/
hyperterminal
5-click on the hyperterminal program; enter a name and icon for ur connection
6-Enter ur port settings:
bits/sec-9600
data bits-8
parity-none
stop bits-1
flow control-none
OK
7-now power on ur router and wait 4 it to boot completely into hyperterminal! u'll knw this when u get the router> prompt.
ENJOY UR CONFIG!