Discussion Locked

Copy in-use files from sick hard drive

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All,
I have discovered that my backup software does not back up certain files - the log gives a sharing violation error - while backing up the W2K system disk (C:\). Now I have an at risk system disk and I am trying to copy the files manually onto a new drive but get the same error. The files are as follows:

\\server1\c\WINNT\system32\config\default
\\server1\c\WINNT\system32\config\default.LOG
\\server1\c\WINNT\system32\config\SAM
\\server1\c\WINNT\system32\config\SAM.LOG
\\server1\c\WINNT\system32\config\SECURITY
\\server1\c\WINNT\system32\config\SECURITY.LOG
\\server1\c\WINNT\system32\config\SYSTEM.ALT
\\server1\c\WINNT\system32\config\software
\\server1\c\WINNT\system32\config\software.LOG
\\server1\c\WINNT\system32\config\system

There are a bunch of other files too, but these appear to be mostly logs.

Does anybody know a way to copy these files before my sick drive dies? Also does anybody know of a backup solution that will completely back up the system disk?

Thanks.

6 replies

by hereinoz

You should be able to achieve the transfer using Norton Ghost or similar. Ghost comes as a cut down version with most motherboard CDs and even this will do the job.

Cheers

by makeitso

Hi HereInOz,
I'm just across the ditch from you. I should have mentioned that the sick disk in question is a dynamic disk and the cut down version of Ghost doesn't work.

by saihib

I don't know how big these files are but you could boot to a Safe Mode command prompt and copy them to a floppy if they'll fit.
There's also a cheap backup program called Handy Backup that claims to back up open and system files. You can download afully functional 30 day evaluation version here:
http://www.handybackup.com/

by makeitso

I tried safe mode but still received sharing violation errors because I still need to login so I am using the registry and the SAM. Handybackup does not support tape drives and their own FAQ states that it is not intended for system backups - looks pretty good otherwise though.

by bob mclellan

If you are backing up to a new Western Digital Hard Drive, WD has a software utility that will make an exact image of the stuff on your existing HD onto the new HD. (I assume, of course, that your expect HD failure is a hardware failure and not a software failure.)

by makeitso

Seagate have a similar utility though I don't know if it works with dynamic disks. I don't really want to buy a HD just for this, however as it means me shutting off the server.

This discussion is closed to new replies.