12 replies
by thechas
First, some details:
Is the drive a CD-ROM, or a CD-RW drive?
You cannot copy to a CD using a standard CD-ROM drive.
What are your system specifications?
Most of the CD burning software requires a 300MHz or faster PC with 128MB or more RAM.
If you have a CD-RW drive, and meet the minimum requirements, then one option is Ahead Software's Nero burn program.
You can download a trial copy at www.nero.com
Most retail packaged CD-RW drives come with a CD with one of 3 different CD buring programs.
OEM, or white box drives often come without software.
Various web-tailers will sell you the OEM version of a CD burning software package for a reasonable price.
I would recommend buying the full version though.
Chas
by dmace2003
by opatzg9
by ctmoore1998
by dmace2003
by dmace2003
by dmace2003
by thechas
What you 'usually' need to get the CD working is the IDE driver for the chip-set on the motherboard.
First, is the CD drive detected by the BIOS.
Watch the screens at boot closely, you should see a page flash by that lists your installed drives.
If BIOS detects the drive, the hardware is likely functioning.
You need the IDE driver.
If you know who made the PC or the motherboard in it, simply go to there web site, and download the IDE driver for your motherboard and version of Windows.
If you need to find out who made your motherboard, try the free download at www.belarc.com
The adviser will give you a detailed list of what's in / on your PC.
You can also use the motherboard ID tools at either www.motherboards.org
or www.wimsbios.com
to find out who made the motherboard.
Download and install the IDE buss-master driver.
If you are still having problems, please post back with the specifics of your system:
Make and model
or motherboard make and model
Version of Windows
Chas
by dmace2003
by dmace2003
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending