Discussion Locked

damage by a virus

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dell Latitude, Pentium III notebook, Win98, Following damage by a virus, I deleted dialup networking, dialup adapter, and TCP/IP, reinstalled them, installed a new PCMCIA modem, ensuring that the old one was removed. But I still cant get the modem to dial. What other components does Windows use to dial?
I could probably fix this by formatting the hard disk and reinstalling windows, but this is the last option.

11 replies

by dmiles

Try re-installing the your Network settings suchas TCP/IP,DNS
Also try trubleshooting the Modem to make sure that drivers are installed
Your last option you have mentioned

by computab

There is no DNS, TCP/IP & modem uninstalled & reinstalled twice. As I said, it must be something else

by johngreer

You didn't say why you replaced the old modem. Have you tried the old modem again?

The new modem may require new drivers (which can be OS specific). You should check with the modem manufacturer.

by computab

A new modem installed correctly with specific supplied drivers, but didnt dial, so a second was installed with specific drivers (Win98), but doesn't dial with phone dialler. Both modems were working in the modems applet where you press for 'more info'.

by edsdave

Assuming virus removed. In Control Panel-Add/Remove Programs-Windows Setup. Take Check out of Communications. Reboot computer.Go back and place check back in Communications. Run Diags on modem to ensure that it is still communicating with the computer. Try again.

by drinkin and thinkin

You didn't mention which virus or how it was removed so I can't be very specific, but it's possible that the virus modified some registry settings that affect Dial Up Networking. With a little research on the specific virus, you may be able to find what (if any) registry modifications were made and how to remove them.

by loki777

Start, Run, Type in 'SFC' click scan

Else

Reinstall win 98 over itself (an os overlay). Make certain you are installing it into the C:\Windows directory and it should be fine (as long as the virus itself has been removed)

This discussion is closed to new replies.