Question Locked

Dell Inspiron 5100 LCD repair

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The title indicates the specific computer I am working on, but I have a feeling that it is a generic laptop LCD question.

I have a LCD that when booted, "lights up," but the screen remains black. It works when connected to an external monitor.

I have worked a similar problem, only in that case, the LCD didn't light up but I could faintly see my screen, the fix for that was swapping out the inverter. I have a feeling that won't solve this one.

Aside from bad cables, has anyone had a problem like this? Do I need to buy a new LCD?

3 replies

by oh smeg

If all the cables are OK.

One or both should fix the monitor but there is a possibility depending on what has happened to the NB that it may be shot though this should be fairly obvious by looking at the monitor.

You are correct this is a fairly generic LCD question.

Col

by joeyboy9898

Open you LCD and find out what size black lights it use. They are normally located on the bottom or top edge of the LCD. Then go to lcdparts.com and find the right black lamps for about $19.99. I know you changed the inverter on another LCD but this worked for mine
!

This discussion is closed to new replies.