Question Locked

Dell laptop lid coming apart - mechanical problem.

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I did not drop or mistreat my Dell Inspiron 6400 silver laptop with a white plastic rim around the lid! Still the white lining came apart from the silver on the right top corner and there is a gap of 1/32". As a result I cannot close my laptop shut. The lid resists and I am afraid that if I force it to close the lcd screen gets crushed and breaks. Does anyone know how to fix it? Or check what's wrong with the plastic rim coming apart? There are no screws or anything that can separate the lining. Or does it just snap together? The laptop serves as a desktop now. Please help.

3 replies

by robo_dev

Most laptop screens are screwed and snapped together. In some cases there are screws at the bottom only, and the top part is snapped on. Sometimes they put some sort of stick-on bezel that has to be pried off to get to the screws.

Since the display is the most expensive part of the laptop, take it to a competent local repair shop if it's out of warranty.

Is there any evidence that something has warped or melted? Of have the parts just 'unsnapped'??

by wanttocancel

There are four I believe underneath the circular bumpers (not the rectangular ones). You can pry the bumpers up with your fingers or a small screwdriver and check to make sure the screws are there and firmly screwed in. You can even unscrew them, press the lid together (because it does snap in place), screw back together and reapply the bumpers.

Or you can follow the advice already given and take it to a reputable repair shop. Or call Dell if you have a warranty on the machine. They can send out a tech with new LCD plastics.

This discussion is closed to new replies.