Discussion Locked

Design a network

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I want to design a network for the first time. It's for 16 workstation 3 servers 5 printers 3B/W 2 color a network device for WAN support for future remote access and internet connection. I want to know where I start. Can you please give me somesuggestion?

1 reply

by joseph moore

Sure. Here is my suggestion.
Put your 16 workstations on their own switch, and put the switch into its own router. These workstations will be their own network, say 192.168.2.0/24
The 5 servers will be on their own switch behind their own router in their own network (192.168.1.0/24).
The printers can go in the same network as the servers.
The "network device for WAN support for future remote access" will go in a hub behind its own router in its own network (192.168.3.0/24).
The internnet connection will come into your building. From there, it can go to a firewall. Going out from the firewall, it could go into a switch. Into this central switch, the otuer routers will be connected into.
This way, your users go through a router, into this central switch, pass the firewall, and out to the Internet.
To connect to the servers and printers, the user workstations go through their router, into the central switch, pass the router used for the server network, and to the servers.

hopethis helps

This discussion is closed to new replies.